H.Violation Affecting Public Safety. Failure to comply with this Rule may constitute a license violation affecting public safety. Basis and Purpose - 6-325
The statutory authority for this rule includes but is not limited to sections 44-10-202(1)(c), 44-10-203(1)(a), 44-10-203(1)(c), 44-10-203(1)(k), 44-10-203(2)(d), 44-10-203(2)(f), 44-10-203(2)(g), 44-10-203(2)(i), 44-10-203(2)(y), 44-10-203(3)(b), 44-10-203(3)(e), 44-10-401(2)(b)(III), 44-10-603, and 44-10-701(3)(c), C.R.S. The purpose of this rule is to define requirements for manufacture of Audited Product for administration by:
(1) metered dose nasal spray,(2) vaginal administration, or(3) rectal administration which may raise public health concerns. This rule defines audit, insurance, minimum product requirements, minimum production process requirements, and pre-production testing requirements for Retail Marijuana Products Manufacturers that manufacture Audited Products. The purpose of this rule further recognizes that Alternative Use Product not within an intended use identified in Rule 3-1015 may raise public health concerns that outweigh its manufacture or Transfer entirely or that require additional safeguards to protect public health and safety prior to manufacturer or Transfer. This rule identifies general requirements for Retail Marijuana Products Manufacturer to seek an Alternative Use Designation from the State Licensing Authority to manufacture any type of Retail Marijuana Product that is not within an intended use identified in Rule 3-1015. This Rule 6-325 was previously Rule R 607, 1 CCR 212-2.