Section 23655 - [Effective Until 1/1/2025] Certification of laboratories to verify compliance with standards for firearm safety devices(a) The Department of Justice shall certify laboratories to verify compliance with standards for firearm safety devices set forth in Section 23650.(b) The Department of Justice may charge any laboratory that is seeking certification to test firearm safety devices a fee not exceeding the costs of certification, including costs associated with the development and approval of regulations and standards pursuant to Section 23650.(c) The certified laboratory shall, at the manufacturer's or dealer's expense, test a firearm safety device and submit a copy of the final test report directly to the Department of Justice, along with the firearm safety device. The department shall notify the manufacturer or dealer of its receipt of the final test report and the department's determination as to whether the firearm safety device tested may be sold in this state.(d) Commencing on July 1, 2001, the Department of Justice shall compile, publish, and maintain a roster listing all of the firearm safety devices that have been tested by a certified testing laboratory, have been determined to meet the department's standards for firearm safety devices, and may be sold in this state.(e) The roster shall list, for each firearm safety device, the manufacturer, model number, and model name.(f) The department may randomly retest samples obtained from sources other than directly from the manufacturer of the firearm safety device listed on the roster to ensure compliance with the requirements of this division.(g) Firearm safety devices used for random sample testing and obtained from sources other than the manufacturer shall be in new, unused condition, and still in the manufacturer's original and unopened package.Added by Stats 2010 ch 711 (SB 1080),s 6, eff. 1/1/2011, op. 1/1/2012.This section is set out more than once due to postponed, multiple, or conflicting amendments.