Section 23650 - Regulations to implement minimum safety standard for firearm safety devices and gun sales(a) The Attorney General shall develop regulations to implement a minimum safety standard for firearm safety devices and gun safes to significantly reduce the risk of firearm-related injuries to children 17 years of age and younger. The final standard shall do all of the following:(1) Address the risk of injury from unintentional gunshot wounds.(2) Address the risk of injury from self-inflicted gunshot wounds by unauthorized users.(3) Include provisions to ensure that all firearm safety devices and gun safes are reusable and of adequate quality and construction to prevent children and unauthorized users from firing the firearm and to ensure that these devices cannot be readily removed from the firearm or that the firearm cannot be readily removed from the gun safe except by an authorized user utilizing the key, combination, or other method of access intended by the manufacturer of the device.(4) Include additional provisions as appropriate.(b) The Attorney General may consult, for the purposes of guidance in development of the standards, test protocols such as those described in Title 16 (commencing with Part 1700) of the Code of Federal Regulations, relating to poison prevention packaging standards. These protocols may be consulted to provide suggestions for potential methods to utilize in developing standards and shall serve as guidance only. The Attorney General shall also give appropriate consideration to the use of devices that are not detachable, but are permanently installed and incorporated into the design of a firearm.(c) The Attorney General shall commence development of regulations under this section no later than January 1, 2000. The Attorney General shall adopt and issue regulations implementing a final standard no later than January 1, 2001. The Attorney General shall report to the Legislature on these standards by January 1, 2001. The final standard shall be effective January 1, 2002.Added by Stats 2010 ch 711 (SB 1080),s 6, eff. 1/1/2011, op. 1/1/2012.