Section 3-6 - Individual Permit Application Requirements The following procedures will be followed in applying for a permit:
(a) Any person who proposes to construct, install or modify a facility required to be permitted by this chapter shall submit a written application on forms provided by the Administrator.
(b) Applications for individual permits shall contain the following information: - (i) Application for a permit to construct, install or modify must be accompanied by three (3) copies of plans, specifications, design data or other pertinent information covering the project, and any additional information required by the Administrator. In instances where an environmental monitoring program is required as determined by the Administrator, the application shall also include a proposed monitoring program to satisfy the requirements of Section 15;
- (ii) All plans, specifications and reports submitted under this chapter shall be sealed, signed, and dated by a licensed professional engineer under W.S. Title 33, Chapter 29 and/or by a licensed professional geologist under W.S. Title 33, Chapter 41, as applicable;
- (iii) All plans and specifications must conform to common and accepted engineering practices as determined by the Administrator or as defined by applicable Water Quality Division regulations;
- (iv) Any person who prepares biosolids or domestic septage for land application or surface disposal shall submit a written application for a permit on forms provided by the Administrator;
- (v) Any person who applies biosolids or domestic septage who does not have a written agreement with the preparer shall submit a written application on forms provided by the Administrator;
- (vi) Any person who prepares treated wastewater for reuse shall submit written application for a permit on forms provided by the Administrator;
- (vii) Any person who applies treated wastewater and who does not have a written agreement with the preparer shall submit a written application on forms provided by the Administrator.