Section SPS 363.5600 - Referenced standards This is a department rule in addition to the requirements in IECC chapter 6[RE]: The following standards are incorporated by reference into chs. SPS 361 to 366:
(1) ASTM C177-13, Test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded-hot-plate apparatus.(2) ASTM C335/335M-10, Test method for steady state heat transfer properties of horizontal pipe insulation.(3) ASTM C518-15, Test method for steady-state thermal transmission properties by means of the heat flow meter apparatus.(4) ASTM C1363-11, Test method for thermal performance of materials and envelope assemblies by means of a hot box apparatus.Wis. Admin. Code Department of Safety and Professional Services SPS 363.5600
Adopted by, CR 16-094: cr., Register April 2018 No. 748 eff. 5-1-18; correction in (intro.) made under s. 13.92(4) (b) 7, Stats., Register April 2018 No. 748, eff. 5/1/2018Amended by, correction in (intro.) made under s. 13.92(4) (b) 7, Stats., Register April 2018 No. 748. Register July 2018 No. 751, eff. 8/1/2018ASTM standards may be purchased at www.astm.org or from the American Society for Testing and Materials International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959.
Copies of the standards adopted under this section are on file in the offices of the department and the legislative reference bureau.