Wis. Admin. Code NR § 256.34

Current through May 28, 2024
Section NR 256.34 - New source performance standards
(1) Any new source, including noncontinuous direct dischargers, which casts primarily malleable iron where metal poured is equal to or less than 3,557 tons per year or casts primarily steel shall achieve the effluent standards contained in s. NR 256.32. Grinding scrubber operations may not discharge process wastewater pollutants to navigable waters.
(2) Any new source, including noncontinuous direct dischargers, which casts primarily malleable iron where metal poured is greater than 3,557 tons per year or casts primarily ductile or gray iron shall achieve the following effluent standards. Grinding scrubber operations may not discharge process wastewater pollutants to waters of the state.

Table 55

FERROUS CASTING SUBCATEGORY CASTING CLEANING OPERATIONS

NSPS

Noncontinuous Direct Dischargers

Maximum for any 1 day

Maximum for monthly average

Maximum for any 1 day

Maximum for monthly average

Annual average

Pollutant or pollutant property

kg/1,000 kkg (pounds per million pounds) of metal poured

mg/l(1)

mg/l(1)

(2)

Copper (T)

0.0129

0.0071

0.29

0.16

0.0029

Lead (T)

0.0237

0.0116

0.53

0.26

0.0067

Zinc (T)

0.0437

0.0165

0.98

0.37

0.0116

Oil & grease

1.34

0.446

30

10

0.223

TSS

0.67

0.536

15

12

0.116

pH

(3)

(3)

(3)

(3)

(3)

(1)These concentrations shall be multiplied by the ratio of (5.33/x) where x is the actual normalized process wastewater discharge flow (in gallons per 1,000 pounds of metal poured) for a specific plant.

(2) kg/1,000 kkg (pounds per million pounds) of metal poured.

(3) Within the range of 7.0 to 10.0 to all times.

Table 56

FERROUS CASTING SUBCATEGORY CASTING QUENCH OPERATIONS

NSPS

Noncontinuous Direct Dischargers

Maximum for any 1 day

Maximum for monthly average

Maximum for any 1 day

Maximum for monthly average

Annual average

Pollutant or pollutant property

kg/1,000 kkg (pounds per million pounds) of metal poured

mg/l(1)

mg/l(1)

(2)

Copper (T)

0.0138

0.0076

0.29

0.16

0.0031

Lead (T)

0.0252

0.0124

0.53

0.26

0.0071

Zinc (T)

0.0466

0.0176

0.98

0.37

0.0124

Oil & grease

1.43

0.476

30

10

0.238

TSS

0.713

0.571

15

12

0.124

pH

(3)

(3)

(3)

(3)

(3)

(1)These concentrations shall be multiplied by the ratio of (5.7/x) where x is the actual normalized process wastewater discharge flow (in gallons per 1,000 pounds of metal poured) for a specific plant

(2)kg/1,000 kkg (pounds per million pounds) of metal poured.

(3)Within the range of 7.0 to 10.0 to all times

TABLE 57

FERROUS CASTING SUBCATEGORY DUST COLLECTION SCRUBBER OPERATIONS

NSPS

Noncontinuous Direct Dischargers

Maximum for any 1 day

Maximum for monthly average

Maximum for any 1 day

Maximum for monthly average

Annual average

Pollutant or pollutant property

kg/62.3 million Sm3 (pounds per billion SCF) of air scrubbed

mg/l(1)

mg/l(1)

(2)

Copper (T)

0.218

0.12

0.29

0.16

0.0488

Lead (T)

0.398

0.195

0.53

0.26

0.113

Zinc (T)

0.736

0.278

0.98

0.37

0.195

Total phenols

0.646

0.225

0.86

0.3

0.15

Oil and grease

22.5

7.51

30

10

3.76

TSS

11.3

9.01

15

12

1.95

pH

(3)

(3)

(3)

(3)

(3)

(1) These concentrations shall be multiplied by the ratio of (0.09/x) where x is the actual normalized process wastewater discharge flow (in gallons per 1,000 SCF of air scrubbed) for a specific plant.

(2) kg/62.3 million Sm3 (pounds per billion SCF) of air scrubbed.

(3) Within the range of 7.0 to 10.0 at all times.

Table 58

FERROUS CASTING SUBCATEGORY INVESTMENT CASTING

NSPS

Noncontinuous Direct Dischargers

Maximum for any 1 day

Maximum for monthly average

Maximum for any 1 day

Maximum for monthly average

Annual average

Pollutant or pollutant property

kg/1,000 kkg (pounds per million pounds) of metal poured

mg/l(1)

mg/l(1)

(2)

Copper (T)

3.19

1.76

0.29

0.16

0.716

Lead (T)

5.84

2.86

0.53

0.26

1.65

Zinc (T)

10.8

4.07

0.98

0.37

2.86

Oil & grease

330

110

30

10

55.1

TSS

165

132

15

12

28.6

pH

(3)

(3)

(3)

(3)

(3)

(1) These concentrations shall be multiplied by the ratio of (1,320/x) where x is the actual normalized process wastewater discharge flow (in gallons per 1,000 pounds of metal poured) for a specific plant.

(2) kg/1,000 kkg (pounds per million pounds) of metal poured.

(3) Within the range of 7.0 to 10.0 to all times.

Table 59

FERROUS CASTING SUBCATEGORY MELTING FURNACE SCRUBBER OPERATIONS(1)

NSPS

Noncontinuous Direct Dischargers

Maximum for any 1 day

Maximum for monthly average

Maximum for 1 day

any Maximum for

monthly average

Annual average

Pollutant or pollutant property

kg/62.3 million Sm3 (pounds per billion SCF) of air scrubbed

mg/l(1)

mg/l(1)

(2)

Copper (T)

1.02

0.561

0.29

0.16

0.228

Lead (T)

1.86

0.911

0.53

0.26

0.526

Zinc (T)

3.44

1.30

0.98

0.37

0.911

Total phenols

3.01

1.05

0.86

0.3

0.701

Oil and grease

105

35

30

10

17.5

TSS

52.6

42.1

15

12

9.11

pH

(4)

(4)

(4)

(4)

(4)

(1) In a multiple ferrous melting furnace scrubber configuration, each discrete wet scrubbing device with an associated wastewater discharge shall be given the mass allowance specified. The allowance will be identical for each device and based on the airflow of the exhaust gas stream that passes through the multiple scrubber configuration.

(2) These concentrations shall be multiplied by the ratio of (0.42/x) where x is the actual normalized process wastewater discharge flow (in gallons per 1,000 SCF of air scrubbed) for a specific plant.

(3) kg/62.3 million Sm3 (pounds per billion SCF) of air scrubbed.

(4) Within the range of 7.0 to 10.0 at all times.

Table 60

FERROUS CASTING SUBCATEGORY MOLD COOLING OPERATIONS

NSPS

Noncontinuous Direct Dischargers

Maximum for any 1 day

Maximum for monthly average

Maximum for any 1 day

Maximum for monthly average

Annual average

Pollutant or pollutant property

kg/1,000 kkg (pounds per million pounds) of metal poured

mg/l(1)

mg/l(1)

(2)

Copper (T)

0.0428

0.0236

0.29

0.16

0.0096

Lead (T)

0.0783

0.0384

0.53

0.26

0.0222

Zinc (T)

0.0145

0.0546

0.98

0.37

0.0384

Oil & grease

4.43

1.48

30

10

0.738

TSS

2.22

1.77

15

12

0.384

pH

(3)

(3)

(3)

(3)

(3)

(1) These concentrations shall be multiplied by the ratio of (17.7/x) where x is the actual normalized process wastewater discharge flow (in gallons per 1,000 pounds of metal poured) for a specific plant.

(2) kg/1,000 kkg (pounds per million pounds) of metal poured.

(3) Within the range of 7.0 to 10.0 to all times.

Table 61

FERROUS CASTING SUBCATEGORY SLAG QUENCH OPERATIONS

NSPS

Noncontinuous Direct Dischargers

Maximum for any 1 day

Maximum for monthly average

Maximum for 1 day

any Maximum for

monthly average

Annual average

Pollutant or pollutant property

kg/1,000 kkg (pounds per million pounds) of metal poured

mg/l(1)

mg/l(1)

(2)

Copper (T)

0.0527

0.0291

0.29

0.16

0.0118

Lead (T)

0.0964

0.0473

0.53

0.26

0.0273

Zinc (T)

0.178

0.0673

0.98

0.37

0.0473

Oil & grease

5.46

1.82

30

10

0.909

TSS

2.73

2.18

15

12

0.473

pH

(3)

(3)

(3)

(3)

(3)

(1) These concentrations shall be multiplied by the ratio of (21.8/x) where x is the actual normalized process wastewater discharge flow (in gallons per 1,000 pounds of metal poured) for a specific plant.

(2) kg/1,000 kkg (pounds per million pounds) of metal poured.

(3) Within the range of 7.0 to 10.0 to all times.

Table 62

FERROUS CASTING SUBCATEGORY WET SAND RECLAMATION OPERATIONS

NSPS

Noncontinuous Direct Dischargers

Maximum for any 1 day

Maximum for monthly average

Maximum for any 1 day

Maximum for monthly average

Annual average

Pollutant or pollutant property

kg/1,000 kkg (pounds per million pounds) of sand reclaimed

mg/l(1)

mg/l(1)

(2)

Copper (T)

0.217

0.12

0.29

0.16

0.0485

Lead (T)

0.396

0.194

0.53

0.26

0.112

Zinc (T)

0.732

0.276

0.98

0.37

0.194

Total phenols

0.642

0.224

0.86

0.3

0.149

Oil & grease

22.4

7.47

30

10

3.73

TSS

11.2

8.96

15

12

1.94

pH

(3)

(3)

(3)

(3)

(3)

(1) These concentrations shall be multiplied by the ratio of (89.5/x) where x is the actual normalized process wastewater discharge flow (in gallons per 1,000 pounds of sand reclaimed) for a specific plant.

(2) kg/1,000 kkg (pounds per million pounds) of sand reclaimed.

(3) Within the range of 7.0 to 10.0 to all times

Wis. Admin. Code Department of Natural Resources § NR 256.34

Cr. Register, June, 1989, No. 402, eff. 7-17-89