Wash. Admin. Code § 51-51-60108

Current through Register Vol. 24-20, October 15, 2024

Section 51-51-60108 - Appendix Y-Construction and demolition material management

The provisions contained in this appendix are not mandatory unless specifically referenced in the adopting ordinance.

AWY101General.

AWY101.1Purpose. The purpose of this code section is to increase the reuse and recycling of construction and demolition materials.

AWY101.2Scope. This code section applies to new buildings and structures construction, alterations to existing buildings and structures and the demolition of existing buildings and structures having a work area greater than 750 square feet (69.68 m²) or with a project value greater than $75,000, whichever is more restrictive.

EXCEPTION:

Projects determined to be unsafe.

AWY102General definitions.

AWY102.1General. The following words and terms shall, for the purposes of this appendix, have the meanings shown herein. Refer to Chapter 2 of this code for general definitions.

Demolition. The process of razing, relocating, or removing an existing building or structure, or a portion thereof.

Divert, diverted, or diversion. The reuse, recycling, or beneficial use of construction and demolition materials.

Recycling. The process of transforming or remanufacturing waste materials into useable or marketable materials for use other than landfill disposal or incineration.

Reuse. The return of a material into the economic stream for use.

Salvage. The recovery of construction and demolition building material and components from a building or site in order to increase the reuse or repurpose potential of these materials and decrease the amount of material being sent to the landfill. Salvaged material may be sold, donated, or reused on site.

AWY103Construction and demolition material management.

AWY103.1Collection containers. All sites where recyclable construction and demolition materials are generated and transported for recycling must provide a separate container for nonrecyclable materials pursuant to WAC 173-345-040.

AWY103.2Salvage assessment. A salvage assessment shall be submitted prior to permit issuance. The salvage assessment shall identify the building components of an existing building that, if removed, have the potential to be reused. This assessment shall be signed by the owner and serve as an affidavit stating that the project shall be executed in compliance with the requirements of this code.

EXCEPTION:

Projects that include only new construction.

AWY103.3Waste diversion report. A waste diversion report shall be submitted prior to issuance of the Certificate of Occupancy or approval of final inspection. The waste diversion report shall identify the following:

1. Weight or volume of project-generated construction and demolition material;

2. Whether the material was disposed in a landfill or diverted;

3. The hauler of the material;

4. The receiving facility or location; and

5. The date materials were accepted by the receiving facility or location.

Wash. Admin. Code § 51-51-60108

Adopted by WSR 23-02-058, Filed 1/3/2023, effective 7/1/2023

Amended by WSR 23-23-104, Filed 11/15/2023, effective 3/16/2024