Wash. Admin. Code § 296-806-48068

Current through Register Vol. 24-21, November 1, 2024

Section 296-806-48068 - Guard planers

(1) You must make sure all cutting heads, and saws if used, are covered by a guard that:

(a) Is metal.

(b) Forms all or part of the exhaust hood if an exhaust system is used.

(2) You must make sure a guard constructed from:

(a) Sheet metal is at least one-sixteenth inch thick.

(b) Cast iron is at least three-sixteenths inch thick.

Wash. Admin. Code § 296-806-48068

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-48068, filed 6/29/04, effective 1/1/05.