Statutes, codes, and regulations
Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-806 - Machine safety
Section 296-806-48066 - Make sure planers with a horizontal cutting head meet these requirements

Wash. Admin. Code § 296-806-48066

Download
PDF
Current through Register Vol. 24-23, December 1, 2024
Section 296-806-48066 - Make sure planers with a horizontal cutting head meet these requirements
(1) You must make sure the cutting head on hand-fed planers is cylindrical.
(2) You must install and adjust the knife blade so it does not extend more than one-eighth inch beyond the body of the head.

Wash. Admin. Code § 296-806-48066

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-48066, filed 6/29/04, effective 1/1/05.