Section 65.209 - Safety Appliances(a) No one shall remove (except temporarily for repair), fail to replace after removal, displace, damage, destroy, carry off, tamper with, or fail to use any safety appliance. (b) When the safety appliance has been removed for repair, it can only be replaced on a boiler if it is in proper working order. (1) The safety appliances shall not be set at a pressure in excess of the MAWP stated on the boiler. (2) The seal shall be replaced prior to returning the boiler to service. (c) If a boiler is dismantled or moved, prior to returning it to service, all safety appliances must conform to the installation requirements of the boiler law and rules.16 Tex. Admin. Code § 65.209
Adopted by Texas Register, Volume 40, Number 22, May 29, 2015, TexReg 3130, eff. 6/15/2015