(a) Standards for jacketed microfilm are the same as other microfilm formats, except as stated in this section.(b) Original microfilm may be placed in a jacket, if there is a security copy stored according to the provisions of § RSA 7.26 of this title (relating to Storage of Original Microfilm) and inspected according to the provisions of § RSA 7.27 of this title (relating to Inspection of Stored Original Microfilm).(c) The following must be included in the jacket header information: (1) name of government and office of origin, if applicable;(2) records series title;(3) date(s) of records; and(4) starting and/or ending indexing information.(d) Header information must be created with a black carbon-type ribbon or ink that will not bleed, spread, or transfer.(e) Microfilm jackets must comply with ANSI/AIIM MS11.(f) The procedures in AIIM TR11 must be used for the jacketing of film.(g) If using a strip film processor camera, the density test and resolution test for original microfilm must be conducted at a minimum of once every roll or every 3,000 images.13 Tex. Admin. Code § 7.29
The provisions of this §7.29 adopted to be effective June 12, 1996, 21 TexReg 4990.