Section 250-RICR-120-05-25.5 - DefinitionsA. Unless otherwise expressly defined in this section, the terms used in this regulation shall be defined by reference to Part 0 of this Subchapter (General Definitions). As used in this regulation, the following terms shall, where the context permits, be construed as follows: 1. "Asphalt" means a dark brown to black cementitious material which is solid, semisolid, or liquid in consistence and in which the predominating constituents are bitumens that occur in nature or which are obtained as residue in refining petroleum.2. "Cutback asphalt" means asphalt cement that has been liquefied by blending with petroleum solvents or any other diluents that contains volatile organic compounds (VOC).3. "Emulsified asphalt" means an emulsion of asphalt cement and water that contains a small amount of an emulsifying agent; emulsified asphalts are heterogeneous systems containing two normally immiscible phases (asphalt and water) in which the water forms the continuous phase of the emulsion and the minute globules of asphalt form the discontinuous phase.4. "Solicit" means to require for use or to specify, by written or oral contract.250 R.I. Code R. 250-RICR-120-05-25.5