Or. Admin. Code § 690-210-0260

Current through Register Vol. 63, No. 11, November 1, 2024

Section 690-210-0260 - Openings in the Casing

There shall be no opening in the casing wall between the top of the casing and the bottom of the required casing seal except for pitless adapters, measurement access ports, and grout nipples installed in conformance with these standards. In no case shall holes be cut in the casing wall for the purpose of lifting or lowering casing into the well bore unless such holes are properly welded closed and watertight prior to placement into the well bore.

WRD 9-1978, f. 12-12-78, ef. 1-1-79; WRD 13-1986, f. 10-7-86, ef. 11-1-86, Renumbered from 690-061-0046

Stat. Auth.: ORS 183, ORS 536, ORS 537 & ORS 540

Stats. Implemented: