Section 33-24-05-1108 - General operating requirements1. Hazardous wastes or treatment reagents must not be placed in a tank system if they could cause the tank, its ancillary equipment, or the containment system to rupture, leak, corrode, or otherwise fail.2. The owner or operator must use appropriate controls and practices to prevent spills and overflows from tank or containment systems. These include at a minimum: a. Spill prevention controls (for example, check valves, dry disconnect couplings).b. Overfill prevention controls (for example, level sensing devices, high-level alarms, automatic feed cutoff, or bypass to a standby tank).c. Sufficient freeboard in uncovered tanks to prevent overtopping by wave or wind action or by precipitation.3. The owner or operator must comply with the requirements of section 33-24-05-1110 if a leak or spill occurs in the tank system.N.D. Admin Code 33-24-05-1108
Adopted by Administrative Rules Supplement 2016-359, January 2016, effective 1/1/2016.General Authority: NDCC 23-20.3-03
Law Implemented: NDCC 23-20.3-03, 23-20.3-04, 23-20.3-05