N.Y. Comp. Codes R. & Regs. Tit. 6 §§ 212-2.5

Current through Register Vol. 46, No. 51, December 18, 2024
Section 212-2.5
(a) Table 5- Process Weight Source Categories

Process Operations for which Permissible Emission Rate is Based on Process Weight:

a.

'Reserved'

b.

Expanded aggregate kilns (lightweight aggregate plants)

c.

Continuous process material dryers emitting solid particulates and water only

d.

Brass and bronze melting furnaces

e.

Ferro alloy production furnaces

f.

Lime kilns

g.

Glass production furnaces

h.

Graphitizing and silicon carbide furnaces

i.

Gypsum dryers

j.

Primary aluminum reduction pot lines

(b) Table 6 - Permissible Emission Rate

Process weight per hour (lb/hr)

Permissible emission rate (lb/hr)

Existing emission source*

New emission source or modification

100

0.52

0.52

500

1.5

1.5

1,000

2.5

2.5

5,000

7.2

7.2

10,000

11.5

11.5

25,000

20.2

20.2

50,000

33.8

33.8

75,000

44.3

44.3

100,000

53.7

53.7

250,000

58.1

0.030 grain per standard cubic foot of undiluted exhaust gas on a dry basis

500,000

64.4

750,000

68.3

1,000,000

71.1

2,000,000

78.2

5,000,000

88.2

* Existing emission sources are ones for which applications for permits were received prior to July 1, 1973

To determine values of permissible emission rate not shown in table:

For all process weight sources up to 100,000 lb/hr, use E = 0.024P0.67

For existing process weight sources in excess of 100,000 lb/hr, use

E = (39P0.082)- 50 where E = permissible emission rate; P = process weight in lb/hr.

N.Y. Comp. Codes R. & Regs. Tit. 6 §§ 212-2.5

Adopted New York State Register June 3, 2015/Volume XXXVII, Issue 22, eff. 6/14/2015
Amended New York State Register February 10, 2021/Volume XLIII, Issue 06, eff. 2/24/2021