N.J. Admin. Code § 7:14A-9.3

Current through Register Vol. 56, No. 23, December 2, 2024

Section 7:14A-9.3 - Ground water monitoring system performance standards

(a) A ground water monitoring system shall consist of a sufficient number of wells, installed at appropriate locations and depths, to yield ground water samples from the uppermost aquifer that:

1. Represent the quality of background ground water that has not been affected by leakage. A determination of background ground water quality may include sampling of wells that are not hydraulically upgradient of the solid waste facility area where:

i. Hydrogeologic conditions do not allow the owner or operator to determine what wells are hydraulically upgradient; or

ii. Sampling at other wells will provide an indication of background ground water quality that is as representative or more representative than that provided by the upgradient wells; and

2. Represent the quality of ground water passing the relevant point of compliance specified by the Department under 7:14A-9.6. The downgradient monitoring system shall be installed at the relevant point of compliance specified by the Department that ensures detection of ground water contamination in the uppermost aquifer. When physical obstacles preclude installation of ground water monitoring wells at the relevant point of compliance, the down-gradient monitoring system may be installed at the closest practicable distance hydraulically down-gradient from the relevant point of compliance specified by the Department that ensures detection of ground water contamination in the uppermost aquifer.

(b) The Department shall approve a multiunit ground water monitoring system instead of separate ground water monitoring systems for each MSWLF when the facility has several units, provided the multiunit ground water monitoring system meets the requirement of (a) above and shall be as protective of human health and the environment as individual monitoring systems for each MSWLF, based on the following factors:

1. The number, spacing, and orientation of the sanitary landfills;

2. The hydrogeologic setting;

3. The site history;

4. The engineering design of the sanitary landfills; and

5. The type of waste accepted at the sanitary landfills.

(c) Monitoring wells shall be cased in a manner that maintains the integrity of the monitoring well bore hole. This casing shall be screened or perforated and packed with gravel or sand, where necessary, to enable collection of ground water samples. The annular space (that is, the space between the bore hole and well casing) above the sampling depth shall be sealed to prevent contamination of samples and the ground water. In addition to these general well construction standards, all monitoring wells shall be constructed in accordance with the edition of the Department's "Field Sampling Procedures Manual" applicable at the time of construction, an alternate method approved by the Department, or as set forth in the NJPDES-DGW permit.

1. The owner or operator of a sanitary landfill shall notify the Department that the design, installation, development, and decommissioning of any monitoring wells, piezometers and other measurement, sampling, and analytical devices documentation has been placed in the records maintained by the facility; and

2. The monitoring wells, piezometers, and other measurement, sampling, and analytical devices shall be operated and maintained so that they perform to design specifications for the duration of the monitoring program.

(d) The number, spacing, and depths of monitoring systems shall be:

1. Determined based upon site specific technical information that shall include thorough characterization of:

i. Aquifer thickness, ground water flow rate, ground water flow direction including seasonal and temporal fluctuations in ground water flow; and

ii. Saturated and unsaturated geologic strata and fill materials overlying the uppermost aquifer, materials comprising the uppermost aquifer, and materials comprising the confining bed defining the lower boundary of the uppermost aquifer including but not limited to: thickness, stratigraphy, lithology, hydraulic conductivity, porosity and effective porosity.

(e) The ground water monitoring system shall perform in accordance with the standards established in this section, and shall consist of a minimum of four monitoring wells, placed such that there is one background quality well, and three hydraulically downgradient wells, located in the uppermost aquifer into which a discharge or leak is likely to occur.

(f) In addition to the minimum number of wells stated in (e) above, additional wells may be required in order to satisfy the performance standards for a ground water monitoring system in 7:14A-9.3(a). The number and spacing of these additional wells shall be capable of intercepting a contaminant plume emanating from a leachate leak located at the most downgradient edge of the waste area. This spacing shall be determined as specified in (d) above.

(g) The Department shall waive the requirements of (e) and (f) above based upon one of the following:

1. Performance of geophysical methods of analysis such as resistivity/conductivity that indicate or confirm that there are no contaminant leaks, or when there are leaks or discharges, that wells are placed in the most concentrated zones of any and all contaminant plumes emanating from the landfill; or

2. Another acceptable method approved in advance by the Department that demonstrates that the minimum number of monitoring wells is not necessary to indicate whether or not the landfill is leaking. A high quality contaminant transport model is one example of an acceptable method.

(h) The adequacy of the monitoring system shall be certified by a qualified ground water scientist and/or approved by the Department. The certification shall indicate that the performance standards of this section, or of the permit, are met. Within 14 days of this certification, the owner or operator shall notify the Department that the certification has been placed in the records maintained by the facility.

N.J. Admin. Code § 7:14A-9.3