Section Saf-C 3228.02 - Tools Required(a) Each inspection station conducting motorcycle inspections shall have the following tools and equipment: (1) Straight line on floor to check tracking of wheels;(2) Straight edge with pointed end, minimum 3 feet long, and a 2 foot level, to check trail;(3) Adjustable protractor capable of checking rake on front forks;(4) Vernier caliper to measure thickness of rotors;(7) Decibel meter ANSI Type 1 or 2, capable of external calibration and equipped with a wind screen;(8) External field calibrator with an accuracy of plus or minus 0.5 decibels;(9) Anemometer for measuring wind speed;(10) Device or method of measuring engine speed of motorcycles not so equipped;(12) Headlight wall or board or commercially manufactured headlight aiming device capable of determining the proper headlight angle of all vehicles to be inspected; and(13) Frame lift or other lift device capable of raising the front or rear wheel off the floor.(b) If the inspection station inspects motorcycles with ball joints, the following tools shall be required: (1) A dial indicator capable of measuring suspension components, including ball joints; and(2) A lift or jack capable of hoisting such motorcycles.N.H. Admin. Code § Saf-C 3228.02
Amended by Volume XXXVI Number 06, Filed February 11, 2016, Proposed by #11016, Effective 1/7/2016, Expires 7/5/2026.Amended by Volume XXXVI Number 28, Filed July 14, 2016, Proposed by #11135, Effective 7/2/2016, Expires 7/2/2026.