Section 534.4357 - Monitoring wells: Placement of gravel and seals in annular space1. If the water or vapors which are being monitored in a monitoring well are not encountered within 5 feet below the surface of the ground, the well driller shall place in the annular space of the well: (a) From the bottom of the well to a maximum of 2 feet above the uppermost perforation in the casing, a gravel pack which consists of quartz sand, silica or other materials which will not contaminate the groundwater or the geologic formation;(b) From the gravel pack placed pursuant to paragraph (a) to a minimum of 2 feet above that gravel pack or to within 20 feet below the surface of the ground, a seal consisting of bentonite chips; and(c) From the seal placed pursuant to paragraph (b) to the surface, a seal, with a minimum thickness of 20 feet below the surface, consisting of cement grout, neat cement or concrete grout.2. If the water or vapors which are being monitored in a monitoring well are encountered within 5 feet below the surface of the ground, the well driller shall comply with the requirements of subsection 1, except that:(a) The gravel pack required pursuant to paragraph (a) of subsection 1 must extend only 6 inches above the uppermost perforation in the casing; and(b) The surface seal required pursuant to paragraph (c) of subsection 1 must be placed from 1 foot below the surface to the surface.3. The well driller shall ensure that a bridge does not occur in the annular space during the placement of the gravel pack and seals required pursuant to this section.4. If more than 20 continuous feet of grout are placed in the annular space of the well or if there is standing liquid in the borehole above the sealing depth, the grout must be placed by tremie pipe in an upward direction.Nev. Admin. Code § 534.4357
Added to NAC by St. Engineer, eff. 12-30-97; A by R039-12, 6-29-2012; A by R044-14, eff. 10/24/2014; A by R068-20A, eff. 12/29/2020; A by R068-20CAP, eff. 6/23/2021NRS 534.020, 534.060, 534.110