410 Ind. Admin. Code 7-24-256

Current through October 23, 2024
Section 410 IAC 7-24-256 - Function of temperature measuring devices

Authority: IC 16-42-5-5

Affected: IC 16-42-5

Sec. 256.

(a) In a mechanically refrigerated or hot food storage unit, the sensor of a temperature measuring device shall be located to measure the air temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot food storage unit.
(b) Except as specified in subsection (c), cold or hot holding equipment used for potentially hazardous food shall be designed to include and shall be equipped with at least one (1) integral or permanently affixed temperature measuring device that is located to allow easy viewing of the device's temperature display.
(c) Subsection (b) does not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment, such as the following:
(1) Calrod units.
(2) Heat lamps.
(3) Cold plates.
(4) Bainsmarie.
(5) Steam tables.
(6) Insulated food transport containers.
(7) Salad bars.
(d) Temperature measuring devices shall be designed to be easily readable.
(e) Food temperature measuring devices and water temperature measuring devices on warewashing machines shall have a numerical scale, printed record, or digital readout in increments no greater than two (2) degrees Fahrenheit in the intended range of use.
(f) For purposes of this section, a violation of subsection (a), (b), (c), (d), or (e) is a noncritical item.

410 IAC 7-24-256

Indiana State Department of Health; 410 IAC 7-24-256; filed Oct 13, 2004, 12:30 p.m.: 28 IR 871; readopted filed Jul 15, 2010, 12:12 p.m.: 20100728-IR-410100261RFA
Readopted filed 11/10/2016, 8:45 a.m.: 20161207-IR-410160371RFA
Readopted filed 9/15/2022, 10:01 a.m.: 20221012-IR-410220206RFA