Section 326 IAC 8-2-3 - Can coating operationsAuthority: IC 13-1-1-4; IC 13-7-7
Affected: IC 13-1-1-1; IC 13-7-1-1; IC 13-7-7-5
Sec. 3.
(a) This section establishes emission limitations for the coating applicator(s) and oven(s) of sheet, can or end coating lines involved in sheet basecoat (exterior and interior) and overvarnish; two-piece can exterior (basecoat and overvarnish); two- and three-piece can interior body spray; two-piece can exterior end (spray or roll coat); three-piece can side-seam spray and end sealing compound operations.(b) No owner or operator of a can coating line subject to this section may cause, allow or permit the discharge into the atmosphere of any volatile organic compounds in excess of:(1) 0.49 kilograms per liter of coating (4.0 pounds per gallon) excluding water, delivered to the coating applicator from sheet basecoat (exterior and interior) and overvarnish. After December 31, 1985, this limitation shall be 0.34 kilograms per liter of coating (2.8 pounds per gallon) excluding water;(2) 0.51 kilograms per liter of coating (4.2 pounds per gallon) excluding water, delivered to the coating applicator from two-and three-piece can interior body spray and two-piece can exterior end (spray or roll coat) operations;(3) 0.66 kilograms per liter of coating (5.5 pounds per gallon) excluding water, delivered to the coating applicator from three-piece can side-seam spray operations;(4) 0.66 kilograms per liter of coating (5.5 pounds per gallon) excluding water, delivered to the coating applicator from end sealing compound operations. After December 31, 1985, this limitation shall be 0.44 kilograms per liter of coating (3.7 pounds per gallon) excluding water; or(5) 0.34 kilograms per liter of coating (2.8 pounds per gallon) excluding water, delivered to the coating applicator from two-piece can exterior (basecoat and overvarnish) operations.Air Pollution Control Board; 326 IAC 8-2-3; filed Mar 10, 1988, 1:20 pm: 11 IR 2533; readopted filed Jan 10, 2001, 3:20 p.m.: 24 IR 1477