Owners or operators of used oil processing and re-refining facilities must develop and follow a written analysis plan describing the procedures that will be used to comply with the analysis requirements of §279.53 and, if applicable, §279.72. The owner or operator must keep the plan at the facility.
(a) Rebuttable presumption for used oil in §279.53. At a minimum, the plan must specify the following: (1) [excluded from incorporation.](2) [Introductory paragraph excluded from incorporation.] (i) The sampling method used to obtain representative samples to be analyzed. A representative sample may be obtained using either: (A) One of the sampling methods in appendix I of part 261 of this chapter; or(B) A method shown to be equivalent under §§260.20 and 260.21 of this chapter [federal] and approved by the director;(ii) The frequency of sampling to be performed, and whether the analysis will be performed on-site or off-site; and(iii) The methods used to analyze used oil for the parameters specified in §279.53.(3) [excluded from incorporation](b) On-specification used oil fuel in §279.72. At a minimum, the plan must specify the following if §279.72 is applicable: (1) [excluded from incorporation](2) [Introductory paragraph excluded from incorporation.](i) The sampling method used to obtain representative samples to be analyzed. A representative sample may be obtained using either: (A) One of the sampling methods in appendix I of part 261 of this chapter; or(B) A method shown to be equivalent under §§260.20 and 260.21 of this chapter [federal] and approved by the director;(ii) Whether used oil will be sampled and analyzed prior to or after any processing/re-refining;(iii) The frequency of sampling to be performed, and whether the analysis will be performed on-site or off-site; and(iv) The methods used to analyze used oil for the parameters specified in §279.72.(3) [excluded from incorporation]Haw. Code R. §§ 11-279.55
[Eff 7/17/2017] (Auth; HRS §§ 342J-4, 342J-13, 342J-31, 342J-35, 342J-52) (Imp: HRS §§ 342J-4, 342J-9, 342J-10, 342J-31, 342J-35, 342J-52, 342J-53, 342J-54)