2 Colo. Code Regs. § 404-1-806
Current through Register Vol. 47, No. 20, October 25, 2024
Section 2 CCR 404-1-806 - TIMING OF INJECTION FLUID SAMPLING AND ANALYSISa.Initial Analysis. An injection Fluid analysis from a representative sample collected at the injection facility is required within 1 year of commencing injection after approval of an injection application.b.Periodic Analysis. An injection Fluid analysis from a representative sample collected at the injection facility is required every 5 years after the initial analysis or 5 years after the most recent change of source analysis.c.Change of Source Analysis. An injection Fluid analysis is required when there is a significant change in the quality of the injection Fluid and as required by Rule 807. The injection Fluid analysis will address all analytes listed in and follow all procedures required by Rules 909.j.(1)- (5).37 CR 16, August 25, 2014, effective 9/30/201438 CR 01, January 10, 2015, effective 2/14/201538 CR 03, February 10, 2015, effective 3/2/201538 CR 07, April 10, 2015, effective 4/30/201538 CR 16, August 25, 2015, effective 9/14/201539 CR 04, February 25, 2016, effective 3/16/201641 CR 05, March 10, 2018, effective 4/1/201841 CR 06, March 25, 2018, effective 5/1/201841 CR 23, December 10, 2018, effective 12/30/201842 CR 02, January 25, 2019, effective 2/14/201942 CR 17, September 10, 2019, effective 9/30/201942 CR 24, December 25, 2019, effective 1/14/202043 CR 17, September 10, 2020, effective 9/30/202043 CR 13, July 10, 2020, effective 11/2/202043 CR 24, December 25, 2020, effective 1/15/202145 CR 07, April 10, 2022, effective 4/30/202245 CR 09, May 10, 2022, effective 5/30/202245 CR 13, July 10, 2022, effective 7/30/2022