6 Colo. Code Regs. § 1014-3-1-9.0
These regulations incorporate by reference (as identified within) materials originally published elsewhere. A list of these materials immediately follows this Section 9.0 . These regulations do not include later amendments to or editions of the incorporated materials. The Department of Public Health and Environment maintains copies of the complete text of the incorporated materials for public inspection during regular business hours, and shall provide certified copies of any non-copyrighted material to the public at cost upon request.
Information regarding how the incorporated materials may be obtained or examined is available from:
Division Director
Hazardous Materials Waste Management Division HMWMD-B2
Colorado Department of Public Health and Environment
4300 Cherry Creek Drive South
Denver, CO 80246
Copies of the incorporated materials have been provided to the State Publications Depository and Distribution Center, and are available for interlibrary loan. The incorporated materials may be examined at any state publications depository library. List of Part 1 Materials Incorporated by Reference:
ASTM Method D-3278-78, Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester.
ASTM Method D5756-02 (November 2002), Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration.
ASTM Method D-93-79 or D-93-80, Standard Test Methods for Flash Point by Pensky-Martens Closed Tester.
Field Manual for Grid Sampling of PCB Spill Sites to Verify Cleanup, EPA-560/ 5-86-017 (May 1986).
National Institute for Occupational Safety and Health (NIOSH), U.S. Department of Health and Human Services (DHHS), NIOSH Manual of Analytical Methods (NMAM), 4th. Ed., DHHS (NIOSH) Publication No. 94-113 (August, 1994), 1st supplemental publication 96-135 (1996), 2nd supplement publication 98-119 (1998):
Method 6009, Mercury (Issue 2, August 1994).
Method 9100, Lead in Surface Wipe Samples (Issue 2, May 1996).
Method 9106, Methamphetamine and Illicit Drugs, Precursors and Adulterants on Wipes by Liquid-Liquid Extraction (Issue 1, October 17, 2011).
Method 9109, Methamphetamine and Illicit Drugs, Precursors and Adulterants on Wipes by Solid Phase Extraction (Issue 1, October 17, 2011).
Method 9111, Methamphetamine on Wipes by Liquid Chromatography/Mass Spectrometry (Issue 1, October 17, 2011).
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, EPA Publication SW-846 [Third Edition (November 1986), as amended by Updates I (dated July 1992), II (dated September 1994), IIA (dated August 1993), IIB (dated January 1995), III (dated December 1996) and IIIA (dated April 1998)]:
Method 1010A, Pensky-Martens Closed-Cup Method for Determining Ignitability (Revision O, September 1986).
Method 1020B, Setaflash Close-Cup Method for Determining Ignitability (Revision 1, July 1992).
Method 1110A, Corrosivity Toward Steel (Revision O, September 1986).
Method 6020, Inductively Coupled Plasma- Mass Spectrometry (Revision O, September 1994).
Method 8260B, Volatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS) (Revision 2, December 1996).
Method 8270D, Semivolatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS) (Revision 4, February 2007).
Method 9014, Titrimetric and Manual Spectrophotometric Determinative Methods for Cyanide (Revision O, December 1996).
Method 9021, Purgeable Organic Halides (POX) (Revision O, December 1996).
Method 9034, Titrimetric Procedure for Acid-Soluble and Acid Insoluble Sulfides (Revision O, December 1996).
Method 9040C, pH Electrometric Measurement (Revision 3, November 2004).
USEPA Contract Laboratory Program National Functional Guidelines for Superfund Organic Methods Data Review, Office of Superfund Remediation and Technology Innovation, United States Environmental Protection Agency, OSWER 9240.1-48, USEPA-540R-08-01 (June 2008).
USEPA Contract Laboratory Program National Functional Guidelines for Inorganic Superfund Data Review, Office of Superfund Remediation and Technology Innovation, United States Environmental Protection Agency, OSWER 9240.1-51, USEPA-540R-10-011 (January 2010).
6 CCR 1014-3-1-9.0