Subpart D - DESIGN OF PIPELINE COMPONENTS
- Section 192.141 - Scope
- Section 192.143 - General requirements
- Section 192.144 - Qualifying metallic components
- Section 192.145 - [Effective 6/28/2024] Valves
- Section 192.145 - [Effective until 6/28/2024] Valves
- Section 192.147 - [Effective 6/28/2024] Flanges and flange accessories
- Section 192.147 - [Effective until 6/28/2024] Flanges and flange accessories
- Section 192.149 - Standard fittings
- Section 192.150 - Passage of internal inspection devices
- Section 192.151 - Tapping
- Section 192.153 - [Effective 6/28/2024] Components fabricated by welding
- Section 192.153 - [Effective until 6/28/2024] Components fabricated by welding
- Section 192.155 - Welded branch connections
- Section 192.157 - Extruded outlets
- Section 192.159 - Flexibility
- Section 192.161 - Supports and anchors
- Section 192.163 - [Effective 6/28/2024] Compressor stations: Design and construction
- Section 192.163 - [Effective until 6/28/2024] Compressor stations: Design and construction
- Section 192.165 - Compressor stations: Liquid removal
- Section 192.167 - Compressor stations: Emergency shutdown
- Section 192.169 - Compressor stations: Pressure limiting devices
- Section 192.171 - Compressor stations: Additional safety equipment
- Section 192.173 - Compressor stations: Ventilation
- Section 192.175 - Pipe-type and bottle-type holders
- Section 192.177 - Additional provisions for bottle-type holders
- Section 192.179 - Transmission line valves
- Section 192.181 - Distribution line valves
- Section 192.183 - Vaults: Structural design requirements
- Section 192.185 - Vaults: Accessibility
- Section 192.187 - Vaults: Sealing, venting, and ventilation
- Section 192.189 - Vaults: Drainage and waterproofing
- Section 192.191 - Reserved
- Section 192.193 - Valve installation in plastic pipe
- Section 192.195 - Protection against accidental overpressuring
- Section 192.197 - Control of the pressure of gas delivered from high-pressure distribution systems
- Section 192.199 - Requirements for design of pressure relief and limiting devices
- Section 192.201 - Required capacity of pressure relieving and limiting stations
- Section 192.203 - Instrument, control, and sampling pipe and components
- Section 192.204 - Risers installed after January 22, 2019
- Section 192.205 - Records: Pipeline components