Part 192 - TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS
- Subpart A - GENERAL (§§ 192.1 — 192.18)
- Subpart B - MATERIALS (§§ 192.51 — 192.69)
- Subpart C - PIPE DESIGN (§§ 192.101 — 192.127)
- Subpart D - DESIGN OF PIPELINE COMPONENTS (§§ 192.141 — 192.205)
- Subpart E - WELDING OF STEEL IN PIPELINES (§§ 192.221 — 192.245)
- Subpart F - JOINING OF MATERIALS OTHER THAN BY WELDING (§§ 192.271 — 192.287)
- Subpart G - GENERAL CONSTRUCTION REQUIREMENTS FOR TRANSMISSION LINES AND MAINS (§§ 192.301 — 192.329)
- Subpart H - CUSTOMER METERS, SERVICE REGULATORS, AND SERVICE LINES (§§ 192.351 — 192.385)
- Subpart I - REQUIREMENTS FOR CORROSION CONTROL (§§ 192.451 — 192.493)
- Subpart J - TEST REQUIREMENTS (§§ 192.501 — 192.517)
- Subpart K - UPRATING (§§ 192.551 — 192.557)
- Subpart L - OPERATIONS (§§ 192.601 — 192.636)
- Subpart M - MAINTENANCE (§§ 192.701 — 192.756)
- Subpart N - QUALIFICATION OF PIPELINE PERSONNEL (§§ 192.801 — 192.809)
- Subpart O - GAS TRANSMISSION PIPELINE INTEGRITY MANAGEMENT (§§ 192.901 — 192.951)
- Subpart P - GAS DISTRIBUTION PIPELINE INTEGRITY MANAGEMENT (IM) (§§ 192.1001 — 192.1015)
- Appendix A to Part 192 - Reserved
- Appendix B to Part 192 - Qualification of Pipe and Components
- Appendix E to Part 192 - Guidance on Determining High Consequence Areas and on Carrying out Requirements in the Integrity Management Rule
- Appendix F to Part 192 - Criteria for Conducting Integrity Assessments Using Guided Wave Ultrasonic Testing (GWUT)
- Appendix C to Part 192 - Qualification of Welders for Low Stress Level Pipe
- Appendix D to Part 192 - Criteria for Cathodic Protection and Determination of Measurements