Cal. Code Regs. tit. 3 § 1339.2

Current through Register 2024 Notice Reg. No. 45, November 8, 2024

Section 1339.2 - Office and Inspection Area Floor Space

(a) Inspection station offices shall contain a minimum of 80 square feet of floor space, except stations designed for three (3) or more grading tables or one (1) or more mechanized grading tables shall contain a minimum of 120 square feet of office floor space.

(b) Inspection area floor space shall conform to the following minimum requirements or their equivalents:

24' x 20' for installation of two (2) regular grading tables or one (1) mechanized grading table.

24' x 28' for installation of three (3) regular grading tables.

24' x 36' for installation of four (4) regular grading tables or two (2) mechanized grading tables.

A minimum of eight (8) feet in width of floor space shall be required for each additional regular table and a minimum of twelve (12) feet in width for each additional mechanized grading table. Stations with special equipment needs shall provide adequate inspection area floor space to accommodate those needs.

A mechanized grading table is defined as that table designed by the University of California, Davis, including all additions.

(c) New stations or stations remodeled to comply with the provisions of this section shall be constructed with the office and inspection area floors not less than five (5) feet nor more than six (6) feet above ground level, except slab constructed stations shall be not less than three (3) feet nor more than six (6) feet above ground level.

Stations located inside a cannery may be floor level.

Cal. Code Regs. Tit. 3, § 1339.2

1. Editorial correction of NOTE (Register 82, No. 9).

Note: Authority cited: Sections 407 and 40761, Food and Agricultural Code. Reference: Sections 40814, 40871 and 41005, Food and Agricultural Code.

1. Editorial correction of NOTE (Register 82, No. 9).