Section 4525 - Minimum Requirements(a) The provisions of this article relating to construction and fire safety apply to all special purpose commercial modulars, manufactured after September 1, 1979, which are sold or offered for sale, rented or leased within this state.(b) The provisions of this article relating to construction and fire safety apply to the alteration or remanufacture of any construction or fire safety equipment or installations in any special purpose commercial modular bearing or required to bear a department insignia of approval.(c) The provisions of this article relating to construction and fire safety apply to the alteration, remanufacture, addition or change in occupancy of any construction and fire safety equipment or installations of any special purpose commercial modular as defined in this article.(d) When a person proposes to sell, offer for sale, rent or lease a special purpose commercial modular designed as a mobile food facility, mobile food preparation unit, or stationary mobile food preparation unit manufactured after the effective date of this article, or where a department insignia of approval has not been issued, it will be necessary that such person obtain written certification from the appropriate local Health Department or State Department of Health, indicating that the special purpose commercial modular complies with the applicable provisions of the California Code of Regulations, Title 17, Division 1, Chapter 5, Subchapter 2, Group 1, Article 10.(e) All defined special purpose commercial modular mobile food facility vehicles are subject to requirements specified in Health and Safety Code, Division 104, Part 7, California Retail Food Code, Chapter 10, Mobile Food Facilities (Commencing with Section 114294) (HSC Part 7) and to the implementing regulations under the California Code of Regulations, Title 17, Division 1, Chapter 5, Subchapter 2, Group 1, Article 10.(f) No later than March 31, 2012, special purpose commercial modular units or portions of existing units undergoing alteration, remanufacturing, repair, conversion or change in occupancy type shall be in compliance with the applicable regulations and standards. Thereafter, units or portions of existing units undergoing alteration, remanufacturing, repair, conversion or change of occupancy type shall be designed and constructed in accordance with this article.Cal. Code Regs. Tit. 25, § 4525
1. New Article 3.5 (Sections 4525-4536) filed 12-7-79; effective thirtieth day thereafter (Register 79, No. 49).
2. Amendment of article 3.5 heading, repealer and new section heading and amendment of section and NOTE filed 9-19-2011; operative 10-19-2011 (Register 2011, No. 38). Note: Authority cited: Section 18015, Health and Safety Code. Reference: Section 18025, Health and Safety Code.
1. New Article 3.5 (Sections 4525-4536) filed 12-7-79; effective thirtieth day thereafter (Register 79, No. 49).
2. Amendment of article 3.5 heading, repealer and new section heading and amendment of section and Note filed 9-19-2011; operative 10-19-2011 (Register 2011, No. 38).