Cal. Code Regs. tit. 13 § 782

Current through Register 2024 Notice Reg. No. 50, December 13, 2024

Section 782 - Mechanical Test Requirements

Running lamps shall meet the following mechanical test requirements:

(a) Housings for Sealed and Semisealed Optical Units. Housings for sealed or semisealed optical units shall comply with the following tests described in Article 5 of this subchapter:

Corrosion

Vibration

Warpage (when plastic housings are used)

(b) Complete Assemblies. Assemblies consisting of a housing with a nonsealed unit or separable bulb, lens, or reflector shall comply with the following tests described in Article 5 of this subchapter:

Corrosion

Dust

Moisture

Vibration

Warpage (when plastic lenses or housings are used)

(c) Sealed or Semisealed Optical Units. Sealed or semisealed optical units shall comply with the following tests described in Article 5 of this subchapter:

Corrosion (when metal reflector backs or replaceable bulbs are used)

Vibration (when filament shields or replaceable bulbs are used)

Warpage (when plastic lenses or reflectors are used)

Cal. Code Regs. Tit. 13, § 782

Note: Authority cited: Section 26103, Vehicle Code. Reference: Sections 24012 and 26103, Vehicle Code.