Ariz. Admin. Code § 9-7-907

Current through Register Vol. 30, No. 50, December 13, 2024

Section R9-7-907 - Shielding and Safety Design

A. An authorized medical physicist experienced in the principles of radiation protection and installation design shall be consulted in the design of a particle accelerator installation and called upon to perform a radiation survey when the accelerator is first capable of producing radiation. The registrant shall provide a copy of the installation radiation survey to the Department before a Department inspection conducted according to R9-7-914.

B. The registrant shall shield each particle accelerator installation with the primary and secondary protective barriers necessary to comply with R9-7-408 and R9-7-416.

C. At the time of application for registration and before treatment of the first patient, the applicant shall provide to the Department a copy of an installation report, signed by the contractor who installed required shielding material recommended by the authorized medical physicist who performed the shielding calculations for the particle accelerator facility.

D. As part of the annual radiation protection program review required in R9-7-407(C), the registrant shall document installed facility shielding and other radiation exposure controls, review patient workload, and note associated changes, if any, in public exposure that are the result of installed facility shielding, increased workload, and other radiation exposure controls in use at the time of the review.

Ariz. Admin. Code § R9-7-907

New Section R9-7-907 recodified from R12-1-907 at 24 A.A.R. 813, effective March 22, 2018 (Supp. 18-1).