Ariz. Admin. Code § 9-7-906

Current through Register Vol. 30, No. 50, December 13, 2024

Section R9-7-906 - Limitations

A. A registrant shall not permit an individual to act as:

1. A particle accelerator operator of any type unless the individual:

a. Has received copies of and instruction in this Article and the registrant's operating and emergency procedures,

b. Demonstrates an understanding of the material, and

c. Has demonstrated competence in the use the particle accelerator, related equipment, and survey instruments that will be employed during the operation of the particle accelerator;

2. A medical particle accelerator operator unless the individual is certified as required in A.R.S. § 32-2811 or the operator meets the requirements in R9-7-603(B); or

3. An industrial particle accelerator operator unless the individual has been instructed in radiation safety.

B. A registrant shall provide either the Radiation Safety Committee or the Radiation Safety Officer with the authority to terminate operations at a particle accelerator facility if this is necessary to protect health and safety or property.

C. If equipment is capable of both stationary and moving beam therapy, the registrant shall ensure that:

1. Irradiation is not possible unless either stationary or moving beam therapy has been selected at the control panel,

2. An interlock is provided to ensure that the machine will operate only in the mode that has been selected,

3. An interlock is provided that terminates irradiation if the gantry fails to move properly during moving beam therapy,

4. A means is provided to prevent movement during stationary therapy, and

5. The mode of operation is displayed at the control panel.

Ariz. Admin. Code § R9-7-906

New Section R9-7-906 recodified from R12-1-906 at 24 A.A.R. 813, effective March 22, 2018 (Supp. 18-1).