Section 30-3-115 - Haulage roads; clearance space; shelter holes(a) Repealed by Laws 1995, ch. 31, § 2.(b) Repealed by Laws 1995, ch. 31, § 2.(c) Repealed by Laws 1995, ch. 31, § 2.(d) Repealed by Laws 1995, ch. 31, § 2.(e) Ample clearance shall be provided at all points where supplies are loaded or unloaded along haulage roads or conveyors. The inspector shall establish by rule required clearances for haulage roads and conveyors. The rules shall include clearances required, requirements for suitable crossover or crossunder bridges and proper guards for travelways.(f) Repealed by Laws 1995, ch. 31, § 2.(g) Shelter holes shall be provided along haulage entries and slopes where locomotive, rope or shuttle-car haulage is used. The inspector shall establish by rule the spacing, sizing and placement of shelter holes which may vary for different locations in the mine.(h) Repealed by Laws 1995, ch. 31, § 2.(j) Repealed by Laws 1995, ch. 31, § 2.(k) Repealed by Laws 1995, ch. 31, § 2.(m) Repealed by Laws 1995, ch. 31, § 2.