Section 30-2-309 - Mine foreman and mine examiner certificates; qualifications; certificate required; reciprocity; council duties(a) No person shall act as mine foreman or safety engineer at any underground mine unless he holds a mine foreman certificate for the type of mineral being mined. To obtain a mine foreman certificate for a particular mineral an applicant shall pass the required examination for the particular mineral. An applicant for the mine foreman examination shall:(i) Be at least twenty-three (23) years of age;(ii) Except as otherwise provided, provide verifiable documentation that he has at least three (3) years practical experience in the mining of the mineral in which he desires to hold a mine foreman certificate. Practical experience shall be determined from practical work of a "hands-on" nature, directly related to the hazards involved in the type of mine for which the certificate is sought. Underground coal mine experience shall qualify for gassy metal or nonmetal mine experience. The council may grant one (1) year's experience credit for not less than five (5) years' experience in an underground gassy metal or nonmetal mine for underground coal mine experience. Surface mine experience in a different mineral may be considered by the council when qualifying an applicant to take the examination for surface foreman certification. The council may grant one (1) year experience credit for not less than ten (10) years experience in another type of mine or in an industry similar in nature to mining;(iii) Complete and timely file an examination application;(iv) When the applicant seeks to receive practical experience credit for holding a mining engineering degree, provide verifiable documentation of the degree; and(v) Hold a valid mine examiner's certificate.(b) No person shall act as a mine examiner in any underground mine unless he holds a mine examiner certificate for the type of mineral being mined. To obtain a mine examiner certificate for a particular mineral an applicant shall pass the required examination for the particular mineral. An applicant for the mine examiner examination shall: (i) Provide verifiable documentation that he has at least two (2) years practical experience in the type of mineral mined in which he desires to hold a mine examiner certificate. Practical experience shall be determined from practical work of a "hands-on" nature, directly related to the hazards involved in the type of mine for which the certificate is sought. Underground coal mine experience shall qualify for gassy metal or nonmetal mine experience. Gassy metal or nonmetal mine experience shall not qualify for underground coal mine experience;(ii) Complete and timely file an examination application;(iii) Be at least twenty-three (23) years of age; and(iv) When the applicant seeks to receive practical experience credit for holding an engineering degree, provide verifiable documentation of the degree.(c) A mining engineering degree from an accredited college or university shall be considered the equivalent of one (1) year practical experience for mine foreman certificate and one (1) year for mine examiner certificate. An approved degree from an accredited college or university which degree is related to mining may be considered the equivalent of one (1) year practical experience for mine foreman certificate and one (1) year for mine examiner certificate. In no case shall practical experience credit for a degree, mining experience credit or a combination thereof exceed one (1) year for a mine foreman certificate or one (1) year for a mine examiner certificate. For purposes of this section a degree shall be limited to a baccalaureate, master's or doctorate degree.(d) Any person holding a certificate of competency from a proper examining board of any state with which Wyoming has a reciprocal agreement may perform the duties in Wyoming for which his certificate certifies that he is competent, without examination by the state mining council. Before assuming any duties in a mine, the person shall present his certificate to the council through the inspector and secure approval of the certificate by the council. The person is subject to examination by the council at the request of the inspector. The person's authority to act in Wyoming as mine foreman, mine examiner or safety engineer may be cancelled in the same manner as certificates issued by the council. No person shall employ any mine foreman, mine examiner or safety engineer in an underground mine who does not possess the certificate of competency required.(e) The state mining council shall include in its rules for implementation of this article, the following: (i) Procedures for review and approval of a study manual prepared by industry to provide guidance to those taking the examinations;(ii) Procedures for preparing the examinations by the council or a committee of council members appointed for this purpose, provided that final approval of the examination shall be made by the council;(iii) Procedures for grading examinations;(iv) Procedures for reviewing the examination results by an applicant with a designated committee of the council and provisions for appeal by an applicant of any adverse decision of the council;(v) Each examination shall include questions to ascertain the applicant's general knowledge of mining practices in the type of mine and mineral involved, including but not limited to ventilation, health and safety, rescue and recovery work involved following mine disasters, detection and control of gasses, fire and explosion prevention and control, use of blasting procedures, electricity and mine equipment and knowledge of the applicable state mining laws. The examination shall also properly identify the importance of any single question which if not answered correctly would cause failure of the entire examination;(vi) Criteria for granting experience credit for purposes of this section.(f) Repealed By Laws 2003, Ch. 5, § 2.