Wis. Stat. § 7.25

Current through Acts 2023-2024, ch. 272
Section 7.25 - Voting machine officials' duties
(1) The municipal clerk of each municipality in which voting machines are used is responsible for the proper ballot being placed on each machine, the sample ballots, setting, adjusting, and putting the machine in order to use in voting when delivered to the ward. For the purpose of labeling, setting, adjusting and putting the voting machines in order, one or more competent voting machine custodians may be employed.
(2) Under the direction of the municipal clerk, the custodian shall label or insert, set, adjust, put in order and deliver the machines with all necessary furniture and appliances to the rooms where the election will be held for each ward at least one hour before the time set for opening the polls on election day.
(3) In preparing a voting machine for an election according to the directions furnished, the custodian shall arrange the machine and ballot so both will meet all the requirements for voting and counting the election in the manner provided for in machine construction.
(4) When a voting machine is properly prepared for an election and delivered to the election ward, it shall be locked and sealed against any movement and the governing body or board of election commissioners shall provide proper protection to prevent tampering with the machines. The custodians preparing the machines shall deliver the keys for the machines to the municipal clerk or executive director of the board of election commissioners together with a written report of each machine's condition.
(5) Before an election each election official serving at a polling place where voting machines are used shall be instructed in their use and their duties in connection with them by the municipal clerk, who shall call as many meetings to give instructions to the election officials as are necessary. Officials and trainees may be compensated for attendance. Any person who does not understand the machines shall not be paid nor be allowed to serve.
(6)
(a) Where voting machines are used, the election officials for each ward shall meet at their proper polling place at least 15 minutes before the time set for opening of the polls to arrange the voting machines and furniture to properly conduct the election.
(b)
1. Before opening the polls, the election officials shall do all of the following:
a. Compare the ballots on the machines with the sample ballots furnished by the municipal clerk to ensure that the names, numbers, and letters on the machine ballots and sample ballots agree.
b. Examine the seal on each machine to see that the seal has not been broken.
c. Examine the counter on each machine to see that each counter registers 000.
2. If any counter on any machine does not register 000, the counter number and the number showing on the counter shall be recorded, signed by all the election officials, and a copy shall be conspicuously posted by the inspectors at the polling place during polling hours.
(c) After the inspection under par. (b), on the forms furnished, the election officials shall certify the condition of each voting machine and its counters. Each form shall be signed by each election official. After the election, one copy of each machine's certification shall be delivered with each copy of the election returns.

Wis. Stat. § 7.25

1971 c. 304 s. 29 (2); 1977 c. 427; 1979 c. 311; 1985 a. 304; 2001 a. 107; 2005 a. 149.