Utah Code § 41-6a-1634

Current with legislation effective through 5/2/2024
Section 41-6a-1634 - Safety chains on towed vehicles required - Exceptions
(1) A towed vehicle shall be coupled by means of a safety chain, cable or equivalent device, in addition to the regular trailer hitch or coupling.
(2) Except as provided under Subsection (3), a safety chain, cable or equivalent device shall be:
(a) securely connected with the chassis of the towing vehicle, the towed vehicle, and the drawbar;
(b) of sufficient material and strength to prevent the two vehicles from becoming separated; and
(c) attached to:
(i) have no more slack than is necessary for proper turning;
(ii) the trailer drawbar to prevent it from dropping to the ground; and
(iii) assure the towed vehicle follows substantially in the course of the towing vehicle in case the vehicles become separated.
(3) A violation of Subsection (1) or (2) is an infraction.
(4) The provisions of Subsection (2) do not apply to a:
(a) semitrailer having a connecting device composed of a fifth wheel and king pin assembly;
(b) pole trailer; or
(c) trailer being towed by a bicycle.

Utah Code § 41-6a-1634

Amended by Chapter 412, 2015 General Session ,§ 125, eff. 5/12/2015.
Amended by Chapter 140, 2013 General Session ,§ 3, eff. 5/14/2013.
Renumbered and Amended by Chapter 2, 2005 General Session