Section 10230.6 - Tanning devices(a) Federal certification.--Only tanning devices manufactured and certified under 21 CFR 1040.20 (relating to sunlamp products and ultraviolet lamps intended for use in sunlamp products) may be used in tanning facilities.(b)Condition.--All tanning devices shall do all of the following: (1) Meet the National Fire Protection Association's National Electrical Code and any other State or local electrical codes.(2) Have physical barriers to protect customers from injury due to touching or breaking lamps.(3) Be maintained in good repair.(c)Stand-up booths.--Stand-up booths shall meet all of the following conditions:(1) Have physical barriers or other means to indicate proper exposure distance.(2) Be constructed rigidly enough to withstand stress of use and impact of a falling person.(3) Contain a rigid access, outwardly opening doors, handrails and nonslip floors.(d) Protective eyewear.-- The legal entity shall provide protective eyewear to each tanning facility. Operators shall provide customers of the tanning facility with protective eyewear in order to use a tanning device. When a tanning device is in use, no other person shall be allowed to remain in the area unless the person has access to protective eyewear. Protective eyewear shall do all of the following:(1) Be provided free of charge. Customers may also be given the option to use their own eyewear.(2) Meet the requirements of 21 CFR 1040.20.(3) Be properly sanitized before each use. Ultraviolet rays shall not be considered a sanitizing agent.Added by P.L. 635 2014 No. 41, § 6, eff. 7/5/2014.