Section 484D.215 - [Effective 7/1/2028] Use of equipment for lighting road with multiple beams Whenever a motor vehicle is being operated on the traveled portion of the highway, or shoulder adjacent thereto, during the times and conditions specified in subsection 1 of NRS 484D.100, the driver shall use a distribution of light, or composite beam, directed high enough and of sufficient intensity to reveal persons and vehicles at a safe distance in advance of the vehicle, subject to the following requirements and limitations:
1. Whenever a driver of a vehicle approaches an oncoming vehicle within 500 feet, the driver shall use a distribution of light, or composite beam, so aimed that the glaring rays are not projected into the eyes of the oncoming driver. The lowermost distribution of light, or composite beam, specified in subsection 2 of NRS 484D.210 shall be deemed to avoid glare at all times, regardless of road contour and loading.2. Whenever the driver of a vehicle follows another vehicle within 300 feet to the rear, the driver shall use a distribution of light permissible under this chapter other than the uppermost distribution of light specified in subsection 1 of NRS 484D.210.[Part 6:166:1925; A 1939, 316; 1945, 268; 1955, 40]-(NRS A 1969, 1216; 1985, 1041)-(Substituted in revision for NRS 484.589) Amended by 2023, Ch. 402,§6, eff. 7/1/2028.[Part 6:166:1925; A 1939, 316; 1945, 268; 1955, 40] - (NRS A 1969, 1216; 1985, 1041)-(Substituted in revision for NRS 484.589 )This section is set out more than once due to postponed, multiple, or conflicting amendments.