Section 484D.210 - Equipment for lighting road with multiple beams Except as hereinafter provided, the headlamps or the auxiliary driving lamp or the auxiliary passing lamp, or combination thereof, on motor vehicles other than motorcycles or mopeds shall be so arranged that the driver may select at will between distributions of light projected to different elevations, and such lamps may, in addition, be so arranged that such selection can be made automatically, subject to the following limitations:
1. There shall be an uppermost distribution of light, or composite beam, so aimed and of such intensity to reveal persons and vehicles at a distance of at least 350 feet ahead for all conditions of loading.2. There shall be a lowermost distribution of light, or composite beam, so aimed and of sufficient intensity to reveal persons and vehicles at a distance of at least 100 feet ahead; and on a straight, level road under any condition of loading none of the high-intensity portion of the beam shall be directed to strike the eyes of an approaching driver.3. Every new motor vehicle, other than a motorcycle or moped, registered in this State after January 1, 1956, which has multiple-beam road lighting equipment shall be equipped with a beam indicator, which shall be lighted whenever the uppermost distribution of light from the headlamps is in use, and shall not otherwise be lighted. The indicator shall be so designed and located that when lighted it will be readily visible without glare to the driver of the vehicle so equipped.[Part 6:166:1925; A 1939, 316; 1945, 268; 1955, 40]-(NRS A 1971, 1472; 1975, 1078)-(Substituted in revision for NRS 484.587) [Part 6:166:1925; A 1939, 316; 1945, 268; 1955, 40] - (NRS A 1971, 1472; 1975, 1078)-(Substituted in revision for NRS 484.587 )