Section 385.125 - Standard plans, designs and specifications for construction of school buildings: Adoption; approval by State Public Works Division of the Department of Administration prior to adoption; fee for costs of approval1. The State Board may adopt standard plans, designs and specifications for the construction of school buildings by the boards of trustees of the various school districts. If such plans, designs and specifications are adopted, provision must be made for the production and distribution of such plans, designs and specifications by appropriate rules and regulations. The board of trustees of a school district may use any such plans, designs and specifications if it determines that the plans, designs and specifications are in the best interests of the district.2. Before the adoption of any such standard plans, designs and specifications, the State Board shall submit the plans, designs and specifications to the State Public Works Division of the Department of Administration, whose written approval thereof must be obtained before any further consideration by the State Board. The State Public Works Division shall verify that the plans, designs and specifications comply with all applicable requirements of the Americans with Disabilities Act of 1990, 42 U.S.C. §§ 12101 et seq., and the regulations adopted pursuant thereto, including, without limitation, the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities set forth in Appendix A of Part 36 of Title 28 of the Code of Federal Regulations. The requirements of this subsection are not satisfied if the plans, designs and specifications comply solely with the Uniform Federal Accessibility Standards set forth in Appendix A of Part 101-19.6 of Title 41 of the Code of Federal Regulations.3. The State Public Works Division of the Department of Administration may charge and collect and the State Board may pay a reasonable fee for the costs incurred by the State Public Works Division in approving the standard plans, designs and specifications submitted.Added to NRS by 1973, 727; A 1997, 2454; 1999, 2854Added to NRS by 1973, 727; A 1997, 2454; 1999, 2854