10 ILCS 5/24B-10.1
In an election jurisdiction where Precinct Tabulation Optical Scan Technology counting equipment is used, the following procedures for counting and tallying the ballots shall apply:
Before the opening of the polls, and before the ballots are entered into the automatic tabulating equipment, the judges of election shall be sure that the totals are all zeros in the counting column. Ballots may then be counted by entering or scanning each ballot into the automatic tabulating equipment. Throughout the election day and before the closing of the polls, no person may check any vote totals for any candidate or proposition on the automatic tabulating equipment. Such automatic tabulating equipment shall be programmed so that no person may reset the equipment for refeeding of ballots unless provided a code from an authorized representative of the election authority. At the option of the election authority, the ballots may be fed into the Precinct Tabulation Optical Scan Technology equipment by the voters under the direct supervision of the judges of elections.
Immediately after the closing of the polls, the precinct judges of election shall open the ballot box and count the number of ballots to determine if the number agrees with the number of voters voting as shown on the Precinct Tabulation Optical Scan Technology equipment and by the applications for ballot or, if the same do not agree, the judges of election shall make the ballots agree with the applications for ballot in the manner provided by Section 17-18 of this Code. The judges of election shall then examine all ballots which are in the ballot box to determine whether the ballots contain the initials of a precinct judge of election. If any ballot is not initialed, it shall be marked on the back "Defective", initialed as to such label by all judges immediately under the word "Defective" and not counted. The judges of election shall place an initialed blank official ballot in the place of the defective ballot, so that the count of the ballots to be counted on the automatic tabulating equipment will be the same, and each "Defective Ballot" and "Replacement" ballot shall contain the same serial number which shall be placed thereon by the judges of election, beginning with number 1 and continuing consecutively for the ballots of that kind in that precinct. The original "Defective" ballot shall be placed in the "Defective Ballot Envelope" provided for that purpose.
If the judges of election have removed a ballot pursuant to Section 17-18, have labeled "Defective" a ballot which is not initialed, or have otherwise determined under this Code to not count a ballot originally deposited into a ballot box, the judges of election shall be sure that the totals on the automatic tabulating equipment are reset to all zeros in the counting column. Thereafter the judges of election shall enter or otherwise scan each ballot to be counted in the automatic tabulating equipment. Resetting the automatic tabulating equipment to all zeros and re-entering of ballots to be counted may occur at the precinct polling place, the office of the election authority, or any receiving station designated by the election authority. The election authority shall designate the place for resetting and re-entering or re-scanning.
When a Precinct Tabulation Optical Scan Technology electronic voting system is used which uses a paper ballot, the judges of election shall examine the ballot for write-in votes. When the voter has cast a write-in vote, the judges of election shall compare the write-in vote with the votes on the ballot to determine whether the write-in results in an overvote for any office, unless the Precinct Tabulation Optical Scan Technology equipment has already done so. In case of an overvote for any office, the judges of election, consisting in each case of at least one judge of election of each of the 2 major political parties, shall make a true duplicate ballot of all votes on such ballot except for the office which is overvoted, by using the ballot of the precinct and one of the marking devices, or equivalent ballot, of the precinct so as to transfer all votes of the voter, except for the office overvoted, to a duplicate ballot. The original ballot upon which there is an overvote shall be clearly labeled "Overvoted Ballot", and each such "Overvoted Ballot" as well as its "Replacement" shall contain the same serial number which shall be placed thereon by the judges of election, beginning with number 1 and continuing consecutively for the ballots of that kind in that precinct. The "Overvoted Ballot" shall be placed in an envelope provided for that purpose labeled "Duplicate Ballot" envelope, and the judges of election shall initial the "Replacement" ballots and shall place them with the other ballots to be counted on the automatic tabulating equipment.
If any ballot is damaged, defective, or if any ballot otherwise contains a Voting Defect, so that it cannot properly be counted by the automatic tabulating equipment, the voter or the judges of election, consisting in each case of at least one judge of election of each of the 2 major political parties, shall make a true duplicate ballot of all votes on such ballot by using the ballot of the precinct and one of the marking devices of the precinct, or equivalent. If a damaged ballot, the original ballot shall be clearly labeled "Damaged Ballot" and the ballot so produced shall be clearly labeled "Damaged Ballot" and the ballot so produced shall be clearly labeled "Duplicate Damaged Ballot", and each shall contain the same serial number which shall be placed by the judges of election, beginning with number 1 and continuing consecutively for the ballots of that kind in the precinct. The judges of election shall initial the "Duplicate Damaged Ballot" ballot and shall enter or otherwise scan the duplicate damaged ballot into the automatic tabulating equipment. The "Damaged Ballots" shall be placed in the "Duplicated Ballots" envelope; after all ballots have been successfully read, the judges of election shall check to make certain that the Precinct Tabulation Optical Scan Technology equipment readout agrees with the number of voters making application for ballot in that precinct. The number shall be listed on the "Statement of Ballots" form provided by the election authority.
The totals for all candidates and propositions shall be tabulated. One copy of an "In-Precinct Totals Report" shall be generated by the automatic tabulating equipment for return to the election authority. One copy of an "In-Precinct Totals Report" shall be generated and posted in a conspicuous place inside the polling place, provided that any authorized pollwatcher or other official authorized to be present in the polling place to observe the counting of ballots is present. The judges of election shall provide, if requested, a copy for each authorized pollwatcher or other official authorized to be present in the polling place to observe the counting of ballots. In addition, sufficient time shall be provided by the judges of election to the pollwatchers to allow them to copy information from the copy which has been posted.
The judges of election shall count all unused ballots and enter the number on the "Statement of Ballots". All "Spoiled", "Defective" and "Duplicated" ballots shall be counted and the number entered on the "Statement of Ballots".
The precinct judges of election shall select a bi-partisan team of 2 judges, who shall immediately return the ballots in a sealed container, along with all other election materials as instructed by the election authority; provided, however, that such container must first be sealed by the election judges with filament tape or other approved sealing devices provided for the purpose which shall be wrapped around the container lengthwise and crosswise, at least twice each way, in a manner that the ballots cannot be removed from the container without breaking the seal and filament tape and disturbing any signatures affixed by the election judges to the container, or which other approved sealing devices are affixed in a manner approved by the election authority. The election authority shall keep the office of the election authority or any receiving stations designated by the authority, open for at least 12 consecutive hours after the polls close or until the ballots from all precincts with in-precinct counting equipment within the jurisdiction of the election authority have been returned to the election authority. Ballots returned to the office of the election authority which are not signed and sealed as required by law shall not be accepted by the election authority until the judges returning the ballots make and sign the necessary corrections. Upon acceptance of the ballots by the election authority, the judges returning the ballots shall take a receipt signed by the election authority and stamped with the time and date of the return. The election judges whose duty it is to return any ballots as provided shall, in the event the ballots cannot be found when needed, on proper request, produce the receipt which they are to take as above provided. The precinct judges of election shall also deliver the Precinct Tabulation Optical Scan Technology equipment to the election authority.
10 ILCS 5/24B-10.1