Section 39-8615 - INSPECTIONS AND TESTSConveyances shall have an inspection performed in accordance with ANSI/ASME standards set forth in section 39-8614, Idaho Code. The following types of inspections are required:
(1) Acceptance. The initial inspection and tests of new or altered equipment by a QEI to check for compliance with the applicable code requirements.(2) Periodic. Periodic inspection and tests plus additional detailed examination and operation of equipment at specified intervals performed by a QEI to check for compliance with the applicable code requirements. Periodic inspections are required at least every five (5) years.(3) Routine. Annual examinations performed in compliance with applicable codes to verify compliance with requirements.[39-8615, added 2004, ch. 359, sec. 1, p. 1072.]