N.C. Gen. Stat. § 160D-1112

Current through Session Law 2024-56
Section 160D-1112 - [Effective 1/1/2025] Changes in work

After a building permit has been issued, no changes or deviations from the terms of the application, plans and specifications, or the permit, except where changes or deviations are clearly permissible under the North Carolina State Building Code, shall be made until specific written approval of proposed changes or deviations has been obtained from the inspection department.

N.C. Gen. Stat. § 160D-1112

Amended by 2023 N.C. Sess. Laws 108,s. 1-n, eff. 1/1/2025.
Added by 2019 N.C. Sess. Laws 111, s. 2.4, eff. 1/1/2021.
Effective Date - S.L. 2019-111: Section 2.4 of 2019 N.C. Sess. Laws 111added Chapter 160D, and section 3.2 made the act effective January 1, 2021. 2020 N.C. Sess. Laws 25, s. 51-a, eff. 6/19/2020, repealed § 3.2 of S.L. 2019-111. Section 51.(b) of S.L. 2020-25 provides: "Part II of S.L. 2019-111 is effective when this act becomes law [June 19, 2020]. Part II of S.L. 2019-111 clarifies and restates the intent of law existing on the effective date of this act and applies to ordinances adopted before, on, and after that date. Valid local government development regulations that are in effect at the time of the effective date of Part II of S.L. 2019-111 remain in effect but local governments shall amend those regulations to conform to the provisions of Part II of S.L. 2019-111 on or before July 1, 2021. Part II of S.L. 2019-111 applies to local government development regulation decisions made on or after the earlier of: (1) The effective date of the amendments to local development regulations made to conform to the provisions of Part II of S.L. 2019-111 or (2) July 1, 2021."
This section is set out more than once due to postponed, multiple, or conflicting amendments.