Section 49-4-50 - Reports of quantity of water withdrawn; methods for determining quantity(A) Each permitted or registered surface water withdrawer must file a report with the department of the quantity of water withdrawn by that surface water withdrawer annually before February first, on forms furnished by the department.(B) The quantity of surface water withdrawn must be determined by one of the following: (1) flow meters accurate to within ten percent of calibration;(2) the rated capacity of the pump in conjunction with the use of an hour meter, electric meter, or log;(3) the rated capacity of the cooling systems;(4) any standard or method employed by the United States Geological Survey in determining these quantities;(5) any other method found to provide reliable water withdrawal data approved by the department.(C) Permitted and registered surface water withdrawers who are required to file a surface water withdrawal report pursuant to subsection (A) are not required to submit the report if the monthly quantity withdrawn from each intake is being reported to the department as a result of another environmental program reporting requirement, permit condition, or consent agreement.Amended by 2010 S.C. Acts, Act No. 247 (SB 452), s 1, eff. 1/1/2011.2000 Act No. 366, Section 1; 1993 Act No. 181, Section 1245; 1982 Act No. 282, Section 3. 2010 Act No. 247, Section 4.B, provides:
"Chapter 1, Title 49 of the 1976 Code is not affected by and supersedes Chapter 4, Title 49 of the 1976 Code, as amended by SECTION 1 of this act."