Section 48-52-840 - Certification using LEED rating system; inspection and monitoring of environmental benefits(A) In order to become certified using a LEED rating system, a major facility project shall register with USGBC prior to filing the first building construction permit application. USGBC shall have the sole discretion in determining whether a major facility project receives certification.(B) All major facility projects that were certified at the LEED Silver standard or higher must be inspected by a third-party commissioning agent in the fifth, tenth, and fifteenth year following certification. The third-party commissioning agent shall determine whether the building is operating at the standard to which it was originally designed and certified. The third-party commissioning agent shall report its findings to the State Engineer. The report must include, but is not limited to, the building's savings on energy and water, the level of its indoor air quality, the existing system's function and performance, problems with the system, and whether the system's performance meets the facility's requirements. If the State Engineer determines that the building is not operating within the spirit of this article, the State Engineer may take appropriate measures to bring the building into compliance.(C) The board shall develop and implement a process to monitor and evaluate the energy and environmental benefits associated with each major facility project designed, constructed, or renovated pursuant to this article. The monitoring and evaluation of each major facility project shall commence one year after certification of the major facility project and shall continue for nineteen years thereafter. All data concerning energy and environmental benefits collected pursuant to this section must be made available to the Department of Administration to be compiled and submitted to the General Assembly pursuant to Section 48-52-860.2007 Act No. 88, Section 1, eff 6/20/2007.