Section 40-11-410 - License classifications and subclassificationsThe following license classifications are in effect:
(1) "General Contractors-Building" which includes commercial, industrial, institutional, modular, and all other types of building construction, including residential structures. This license classification includes all work under the subclassifications of Wood Frame Structures, Nonstructural Renovation, Masonry, Pre-engineered Metal Buildings, Roofing, Structural Framing, and Miscellaneous Metals. Licensees under this classification may perform ancillary work referenced in the Concrete, Concrete Paving, Asphalt Paving, Glass and Glazing, Grading, Public Electrical Utility, and Highway Incidental subclassifications, when the work is directly associated with the building or structure which the licensee has been engaged to construct. Ancillary work must be performed by the licensee, and it cannot exceed twenty percent of the total cost of construction or the work must be performed by a contractor licensed in the appropriate license subclassification. If a project includes work performed under a Mechanical Contractor subclassification or any of these license subclassifications, the licensee must have a license for this work or use a contractor licensed in the appropriate license classification or subclassification to perform the work: Swimming Pools, Bridges, Boring and Tunneling, Water and Sewer Lines, Pipe Lines, Railroad Lines, Marine, and Water and Sewer Plants.
(2) "General Contractors-Highway" which includes work under these subclassifications:(a) "Bridges" which include bridge construction and repairs, railroad trestles and overpasses, and work under the subclassifications of Boring and Tunneling, Concrete, Marine, and Railroad Lines. Bridges are defined as structures over a depression or an obstruction such as water, highway, or railway, having a track or passageway designed for carrying vehicular traffic weighing over two thousand pounds.(b) "Concrete Paving" which includes the construction, rehabilitation and repair of concrete streets, roads, highways, driveways, parking lots, airport runways and aprons, and concrete work incidental thereto including, but not limited to, sidewalks, curbs, medians, and barrier walls. This subclassification also includes work under the subclassification of Grading.(c) "Asphalt Paving" which includes asphalt paving, repairs and rehabilitation of streets, roads, highways, driveways, parking lots, airport runways and aprons, concrete work including curbs, gutters, and concrete or asphalt paving of storm sewers, and includes paving with sealers, geotextile fabrics, slurry seals, and surface treatments incidental thereto. This subclassification also includes work under the subclassification of Grading.(d) "Grading" which includes the soil preparation and rehabilitation of streets, roads, highways, railroad beds, building sites, parking lots, and storm sewers. This subclassification also includes work under the subclassification of Highway Incidental.(e) "Highway Incidental" which includes highway work for grooving, milling, rehabilitating, and installing guardrails, gutters, highway signs, pavement marking, and painting.(3) "General Contractors-Public Utility" which includes work under these subclassifications: (a) "Pipe Lines" which includes the construction, installation, alteration, maintenance, and repair of systems for the transmission or distribution of petroleum fuels, petroleum distillates, natural gas, chemicals, and slurries through pipeline from one station to another including all excavating, trenching, backfilling and installation of booster stations and equipment and installation and replacement of tanks connected to the system. This subclassification does not include the piping and tanks for the dispensing of any petroleum product at retail.(b) "Water and Sewer Plants" which includes all classifications and subclassifications necessary for the construction of water treatment and wastewater treatment facilities. However, if a project includes work to be performed under any of these license subclassifications, the licensee must either have a license to perform this work or use a contractor licensed in the appropriate license classification or subclassification to perform the work: Bridges, Railroad Lines, Specialty Roofing, and Mechanical work.(c) "Water and Sewer Lines" which includes construction work on water mains, water service lines, water storage tanks, sewer mains, sewer lines, lift stations, pumping stations and appurtenances to water storage tanks, lift stations, pumping stations, pavement patching, backfill, and erosion control as a part of construction, and which includes connection at the building of all lines to the appropriate lines contained in commercial structures, installation and repair of a project involving manholes, the laying of pipe for storm drains and sewer mains, all necessary connections, and excavation and backfilling, and concrete work incidental thereto. Contractors in this license subclassification in license groups three, four, and five may install fire protection sprinkler system underground mains to a flanged outlet 1'-0" above the finished floor in compliance with National Fire Protection Association Standard 24. However, shop drawings must be submitted and approved by the State Fire Marshal with a copy of the approved drawings going to the licensed fire sprinkler contractor. Flushing and testing certificates must be delivered to the authority having jurisdiction and the performing licensed fire sprinkler contractor performing. General contractors in this license subclassification may not engage in water and sewer line work from the right-of-way to a residential structure unless the entity is a subcontractor to a licensee holding a plumbing subclassification.
(4) "General Contractors-Specialty" which includes work under these subclassifications: (a) "Boring and Tunneling" which includes the construction of underground or underwater passageways with diameters in excess of ninety-six inches or lengths in excess of three hundred fifty feet by digging or boring through and under the earth's surface, including the bracing and compacting of passageways to make them safe for the purpose intended. This subclassification includes the preparation of ground surfaces at points of ingress and egress. Underground structures less than ninety-six inches in diameter or less than three hundred fifty feet in length are considered normal excavation.(b) "Concrete" which includes all work in connection with concrete forming and placing; assembling of forms, molds, slipforms and pans; centering, trenching, excavating, backfill, and grading in connection with concrete construction; construction of sidewalks, driveways, curbs, medians, and barrier walls; and installing of embedded items essential to or comprising an integral part of concrete or concrete construction including reinforcing elements and accessories including, but not limited to, concrete chimneys, floors, piers, and foundations when using concrete rebar and other materials common to the concrete industry. This subclassification does not include the General Contractor-Highway-Bridge license subclassification or the construction of streets, roads, parking lots, and highways.(c) "Nonstructural Renovation" which includes interior and exterior installing, remodeling, renovations, and finishes of acoustical ceiling systems and panels, load-bearing and nonload-bearing drywall partitions, lathing and plastering, flooring (excluding carpet) and finishing, interior recreational surfaces, window and door installation, and installation of fixtures, cabinets, and millwork; and which also includes fireproofing, insulation, lining, painting, partitions, sandblasting, interior and exterior wall covering, and waterproofing. This subclassification does not include alterations to load-bearing portions of a structure.(d) "Marine" which includes all water activities to construct seawalls, bulkheads, docks, piers, wharves, and other water structures including, but not limited to, pile driving, boat slips, and boardwalks. Licensees under this classification may perform ancillary work including fill grading, and foundations, including piling. This license subclassification does not include structures within the scope of the General Contractor-Building classification.(e) "Masonry" which includes the installation, alteration, and repair of poured-in-place concrete foundations (e.g. footings or reinforced slabs), brick, concrete block, and products common to the masonry industry, including mortarless types and synthetic masonry products common to the building industry.(f) "Pre-engineered Metal Buildings" which includes the construction of pre-engineered metal buildings consisting of no more than a concrete floor slab, metal frame, metal roof, metal sidewalls, foundations, and building insulation; but does not include mechanical work as described in Section 40-11-410(5).(g) "Railroad Lines" which includes the installation and repair of railroad lines, including setting ties, tie plates, rails, rail connectors, frogs, switch plates, switches, and signal markers. This subclassification does not include grading, trestles, or overpasses.(h) "Roofing" which includes the installation and repair of roofs and roof decking on commercial, industrial, residential, and institutional structures requiring materials that form a water-tight and weather-resistant surface. This license subclassification includes cedar, cement, asbestos, clay tile and composition shingles, all types of metal coverings, wood shakes, single ply and built-up roofing, protective and reflective roof and deck coatings, sheet metal valleys, flashings, gravel stops, gutters and downspouts, and bituminous waterproofing.(i) "Structural Framing" which includes the installation, repair, or alteration of metal or composite structural members for buildings or structures, including riveting, welding, and rigging. This subclassification also includes work under the subclassification of Miscellaneous Metals.(j) "Miscellaneous Metals" which includes the installation, repair, or alteration of metal or composite shapes, tubing, pipes and bars, including minor field fabrication as may be necessary. This license classification includes fabricating, assembling, installing, and replacing solar panels and related components common to the building industry. Roof mounting of solar panels only may be performed by a licensed General Contractor with the Roofing or Building subclassification. Wiring and connections only may be performed by a licensed Mechanical Contractor with the Electrical subclassification. If a roof requires structural upgrades for the mounting and installing of solar panels, any structural upgrading of the roof must be performed by a licensed General Contractor with either the Building or Structural Framing subclassifications. Fences not over seven feet high do not require licensure under this subclassification.(k) "Swimming Pools" which includes the construction, service, and repair of all residential, commercial, and institutional swimming pools and spas, including concrete, gunite, plastic, vinyl-lined, and fiberglass pools and spas; pool decks, walkways, tiling, and coping; and the installation of all equipment, including pumps, filters, and chemical feeders, water and gas service lines from the point of service to the pool equipment, wiring from the pool equipment to the first readily accessible disconnect, pool piping, fittings, backflow prevention devices, waste lines, and other integral parts of a swimming pool or spa.(l) "Wood Frame Structures" which include framing, roofing, siding, or flooring for wood-framed structures in excess of five thousand square feet used for housing livestock, storage, or processing, when such structures are not used for habitation or office facilities.(m) "Public Electrical Utility" which includes the installation, replacement, alteration, and repair of transmission lines on or off public rights-of-way, including erection of poles, guying systems, tower line erection, street lighting, and outside lighting of all voltages and all underground systems, including ducts for signal communication and similar installations, transformers, circuit breakers, capacitors, primary metering devices, and other related equipment not used in connection with this subclassification. A contract that contains electrical work above fifty volts must be performed by a licensed public utility-electrical or mechanical-electrical contractor. This subclassification does not cover athletic field lighting, stadium lighting, or lighting which is not on public easements or rights-of-way.(n) "Boiler installation" which includes those who are qualified to install, repair, and service boilers and boiler piping including the boiler auxiliary equipment, controls, and actuated machinery and dryer rolls. To qualify for this subclassification, a person must pass a technical examination administered by the board or must be the holder of the American Society of Mechanical Engineers (ASME) "S" stamp or hold the National Board of Boiler and Pressure Vessel Inspectors (NBBPVI) "R" stamp and meet the requirements for licensure according to this chapter.(o) "Glass and Glazing" which includes, but is not limited to, commercial, residential, industrial, institutional, modular, and all other types of glass and glazing construction. The construction is limited to selection, cutting, assembling, and installing all makes and kinds of glass for windows, sash and doors, metal frames, ornamental decorations, mirrors, tub and shower enclosures, guard and handrail systems, and other fixed openings. This license classification includes all work under the subclassifications of renovation, structural shapes, and architectural aluminum glazing systems which include aluminum entrance doors and frame systems, entrance and egress hardware, curtain wall systems, sliding doors/mall fronts, overhead glazing systems, and architectural window systems and accessories.(5) "Mechanical Contractors" which includes work under these subclassifications: (a) "Air Conditioning" which includes the installation, replacement, alteration, and repair of air conditioning equipment and systems which consist of a number of components necessary to produce conditioned air for environmental heating or cooling, or both, within buildings. Hot water or steam heating systems or components are not included under this classification. This subclassification also includes work under the subclassifications of Packaged Equipment and Refrigeration.(b) "Heating" which includes installation, replacement, alteration, and repair of heating equipment and systems in buildings which require the use of high or low pressure steam vapor or hot water including all piping, ducts, and mechanical equipment, including boilers, within, adjacent to, or connected with a building and the installation of necessary gas lines if any of this equipment is gas-fired.(c) "Packaged Equipment" (air conditioning-heating packaged equipment limited to twenty-five tons cooling and five hundred thousand BTU/HR heating per unit) which includes the installation, replacement, alteration, or repair of air conditioning equipment and systems which consist of a number of components necessary to produce conditioned air for environmental heating or cooling, or both, within buildings, including types of heating systems and any size package equipment; and the installation, alteration, and repair of ventilation systems, including duct work, air filtering devices, kitchen exhaust and other hood systems, water treatment devices, pneumatic or electrical controls, or control piping; thermal and acoustical insulation, vibration isolation materials and devices, liquid fuel piping and tanks, water and gas piping from service and heating circuits and air handling systems, including gas-fired furnaces and space heaters; and factory-assembled single package units and split type direct expansion equipment, including heat pumps. This subclassification does not include installing, replacing, altering, or repairing hot water or steam heating systems or components.(d) "Electrical" which includes the installation, alteration, or repair of wiring-related electrical material and equipment used in the generating, transmitting, or utilization of electrical energy less than six hundred volts, including all overhead electrical wiring on public rights-of-way for signs and street decorations and all underground electrical distribution systems of less than six hundred volts serving private properties. This subclassification also includes, but is not limited to, installing, altering, and repairing, panels, controls, conductors, conduits, cables, devices, plates, electric ceilings, control wiring; and electric heating, lighting fixtures, lamps, general outside lighting, underground and overhead feeder distribution systems for services, and related components or work necessary to provide a complete electrical system and installing window or through-the-wall air conditioning units not to exceed three HP or three tons where no piping is necessary. Under this subclassification, general outside lighting is limited solely to within property lines and not on public easements or rights-of-way. A contract that contains electrical work above fifty volts must be performed by a contractor licensed under this subclassification or a licensed public electrical utility contractor. This license subclassification includes installing, altering, and repairing all lighting on private property, athletic fields, stadiums, parking lots, and the design, installation, and servicing of fire alarm systems.(e) "Lightning Protection Systems" which includes installation, replacement, alteration, or repair of necessary lightning protection conduction, cables, rods, points, anchors, fastening devices, labels, ground clamps, braces, and all related component parts necessary for a complete lightning protection system.(f) "Plumbing" which includes the installation, replacement, alteration, and repair of all plumbing including solar water heating when performed solely within property lines and not on public easements or rights-of-way except to make connections to water meters or sewer taps as allowed by the utility owner; and the installation, alteration, and repair of all piping, fixtures, and appliances related to water supply, including pressure vessels and tanks, and excluding municipal or related water supply systems; venting and sanitary drainage systems for all fluid and semi-fluid and organic wastes; roof leaders; water-conditioning equipment; piping and equipment for swimming pools; and installation of a system of pipes, fittings, fixtures, drains, and all necessary component parts upon the premises or in a building to supply water to buildings and to convey sewage or other waste products from buildings. If this equipment is gas-fired, the necessary gas lines may be installed under this subclassification used in connection with this subclassification. Plumbing contractors in license groups three, four, and five are not required to be licensed under Chapter 45, Title 23 to install standpipe systems, including water hose connections, water hose cabinets, and related branch lines if the water hoses do not supply water to automatic fire protection sprinklers.(g) "Pressure and Process Piping" which includes the installation, maintenance, repair, alteration, or extension of a system of piping, tubing, vessels, containers, pumps, apparatus, and appurtenances in connection with pressure piping used for circulation, transporting, holding, or processing of gas, vapor, fluid, liquid, semi-liquid, or any combination of these. However, boilers, boiler piping, piping used to convey potable water, sanitary sewage, liquefied petroleum, manufactured or natural gas or refrigeration, air conditioning and comfort heating piping are not included in this subclassification.(h) "Refrigeration" which includes the installation, replacement, alteration, and repair of refrigeration equipment and systems used for processing, storage, and display of food products and other perishable commodities and commercial, industrial, and manufacturing processes requiring refrigeration, excluding comfort air conditioning. This subclassification also includes work on systems including related equipment for temperature, safety, and capacity controls, thermal insulation, vibration isolation materials and devices, water treatment devices, construction and installation of walk-in refrigeration boxes, liquid fuel piping and tanks, water and gas piping from equipment to service connection, and testing and balancing of refrigeration equipment and systems.Amended by 2023 S.C. Acts, Act No. 69 (HB 4115),s 14, eff. 5/19/2023.2005 Act No. 59, Section 2; 2001 Act No. 32, Sections 2, 3A; 1999 Act No. 91, Section 7; 1998 Act No. 440, Section 1.