Section 40-6-302 - Labeling of bicycles; required equipment(a) Any electric assisted bicycle manufactured on and after January 1, 2020, shall be equipped with a permanently affixed label in a prominent location which identifies such device as a class I, II, or III electric assisted bicycle along with the motor wattage and top assisted speed capability. Such label shall be printed in at least 9 point Arial font.(b) The requirements set forth in subsection (a) of this Code section shall apply to a manufacturer, distributor, and any person who alters an electric assisted bicycle in a manner that changes the class by which the electric assisted bicycle is identified.(c) Any electric assisted bicycle shall have the same equipment required for bicycles as set forth in Part 1 of this article; provided however, that such devices shall be capable of disengaging the motor when the operator stops pedaling or applies the brakes.(d) Any class III electric assisted bicycle shall be equipped with a speedometer that is capable of displaying the speed the device is traveling measured in miles per hour.Added by 2019 Ga. Laws 56,§ 4, eff. 7/1/2019.