Section 21293 - Requirements for operation on highway during darkness(a) Every electrically motorized board operated upon a highway during darkness shall be equipped with all of the following:(1) Except as provided in subdivision (b), a lamp emitting a white light that, while the electrically motorized board is in motion, illuminates the highway in front of the operator and is visible from a distance of 300 feet in front of the electrically motorized board.(2) Except as provided in subdivision (c), a red reflector on the rear that is visible from a distance of 500 feet to the rear when directly in front of lawful upper beams of headlamps on a motor vehicle.(3) Except as provided in subdivision (d), a white or yellow reflector on each side that is visible from a distance of 200 feet from the sides of the electrically motorized board.(b) A lamp or lamp combination, emitting a white light, attached to the operator and visible from a distance of 300 feet in front of the electrically motorized board, may be used in lieu of the lamp required by paragraph (1) of subdivision (a).(c) A red reflector, or reflectorizing material meeting the requirements of Section 25500, attached to the operator and visible from a distance of 500 feet to the rear when directly in front of lawful upper beams of headlamps on a motor vehicle, may be used in lieu of the reflector required by paragraph (2) of subdivision (a).(d) A white or yellow reflector, or reflectorizing material meeting the requirements of Section 25500, attached to the operator and visible from a distance of 200 feet from the sides of the electrically motorized board, may be used in lieu of the reflector required by paragraph (3) of subdivision (a).Added by Stats 2015 ch 777 (AB 604),s 3, eff. 1/1/2016.