Ariz. Rev. Stat. § 3-3452

Current through L. 2024, ch. 259

Section 3-3452 - Licensing fees; proration; cancellation for nonpayment

A. The following fees shall be paid to the division as license fees for devices used for commercial purposes:

Schedules of Fees
1. Weighing devices:
0 - 500 pounds capacity (or metric equivalent)	$ 12.00
501 - 2,000 pounds capacity	18.00
2,001 - 7,500 pounds capacity	36.00
7,501 - 20,000 pounds capacity	80.00
20,001 - 60,000 pounds capacity	120.00
60,001 pounds capacity and over	180.00
2. Liquid metering devices (meters) other than ||||||for liquid petroleum gas and utility meters:
maximum 12 gallons per minute and under	12.00
maximum 13 - 150 gallons per minute	36.00
maximum 151 - 500 gallons per minute	90.00
maximum 501 - 1,000 gallons per minute	138.00
maximum 1,001 gallons per minute and over	168.00
3. Motor fuel devices (dispensers) other than ||||||for liquid petroleum gas (not including ||||||satellite hoses or nozzles):
Standard Vapor Recovery Test
each meter	15.00	30.00
each blending valve	15.00	30.00
high volume (over 19 gallons per minute) diesel per hose and nozzle	15.00
keylock, limited access, with accumulators, per hose and nozzle	22.50
remote indicator and control unit (no hoses or nozzles) (accessory only)	22.50
4. Liquid measuring devices for liquid petroleum ||||||gas (meters):
small bottle fill measuring devices	24.00
motor fuel measuring devices, uncompensated	24.00
motor fuel measuring devices, temperature compensating, including compressed natural gas filling devices	48.00
motor fuel measuring devices, keylocks	48.00
3/4" and 1" meters, uncompensated	48.00
1 1/4", 1 1/2" and 1 3/4" meters, uncompensated	72.00
2" meters and larger, uncompensated	72.00
3/4" and 1" meters, temperature compensating	54.00
1 1/4", 1 1/2" and 1 3/4" meters, temperature compensating	90.00
2" meters and larger, temperature compensating	96.00
5. Linear measuring devices:
||||||||all linear measuring mechanical devices	24.00
6. Time measuring devices:
||||||||all time measuring mechanical, electrical and |||||||||||| electronic devices	24.00
7. Counting devices:
all mechanical and electronic counting devices	12.00

B. Testing, inspection, certification and calibration fees shall be paid pursuant to the fee schedule set forth in subsection A of this section or the rules of the division. The division shall waive license fees for customer parking time measuring meters owned by municipalities.

C. Issuance or renewal of license as:

1.	Public weighmaster	48.00
2.	Registered service agency	24.00
3.	Registered service representative	4.80

D. The fees set forth in this section are the maximum amounts that may be charged, but the associate director, at the associate director's discretion, may reduce the fees to any amount the associate director deems necessary.

E. The associate director may prorate the fees set forth in this section for partial-year application.

F. If a person fails to pay a license, permit or certification fee on or before the date the fee is due, the division shall impose a penalty equal to twenty percent of the fee. For each thirty-day period after the date the fee is due, the division shall impose an additional penalty equal to twenty percent of the fee. If a person fails to pay a license, permit or certification fee and all related penalties for ninety days after the fee is due, the division shall cancel the license, permit or certification.

A.R.S. § 3-3452

Amended by L. 2016, ch. 232,s. 17, eff. 7/1/2016.

Renumbered from A.R.S. §41-2092 by L. 2015, ch. 244,s. 2, eff. 7/1/2016.