Statutes, codes, and regulations
Wyoming Administrative Code
Agency 020 - Environmental Quality, Dept. ofSubagency 0011 - Water QualityChapter 11 - DESIGN AND CONSTRUCTION STANDARDS FOR SEWERAGE SYSTEMS, TREATMENT WORKS, DISPOSAL SYSTEMS OR OTHER FACILITIES CAPABLE OF CAUSING OR CONTRIBUTING TO POLLUTION AND MOBILE HOME PARK AND CAMPGROUND SEWERAGE AND PUBLIC WATER SUPPLY DISTRIBUTION SYSTEMS
Part H - STANDARDS FOR THE REUSE OF TREATED DOMESTIC WASTEWATER
Section 11-83 - Monitoring

020-11 Wyo. Code R. § 11-83

Download
PDF
Current through April 27, 2019
Section 11-83 - Monitoring

(a) Sampling. Representative samples of the treated wastewater that is to be reused shall be collected and analyzed by the person who prepares the wastewater.

(b) Methods. Waste constituents shall be analyzed in accordance with 40 CFR Part 136, Guidelines Establishing Test Procedures for the Analysis of Pollutants.

(c) Parameters. The treated wastewater shall be analyzed for the following:

  • (i) Fecal coliform;
  • (ii) Nitrate as N;
  • (iii) Ammonia as N;
  • (iv) pH;
  • (v) Parameters identified in 40 CFR Part 122, Appendix D, Table III, when required by the NPDES permit; and
  • (vi) Other parameters identified in the permit.

(d) Frequency for monitoring for these pollutants shall be:

  • (i) For lagoon systems, once per month or the frequency specified in the NPDES discharge permit whichever is more frequent;
  • (ii) For mechanical plants, once per week or the monitoring frequency specified in the NPDES discharge permit whichever is more frequent; and
  • (iii) For monitoring of parameters identified in Section 83(c) (v), shall be conducted at the frequency specified in the NPDES discharge permit.

020-11 Wyo. Code R. § 11-83

Adopted, Eff. 6/29/2018.