Section 11-16 - Monitoring Requirements (a) A detailed monitoring program shall be approved by the Administrator and included in the permit or Research and Development License application, as required by Section 5(a)(xv) of this Chapter, and shall constitute a requirement of the permit. The program shall describe the procedures for monitoring the quantity and quality of waters that may be affected by the operation before mining through reclamation and shall, at a minimum, specify: - (i) Requirements for:
- (A) The proper use, maintenance, and installation, when appropriate, of monitoring equipment or methods (including biological monitoring methods when appropriate);
- (B) The intervals and frequency of monitoring, sufficient to yield data which are representative of the monitored activity, including continuous monitoring when appropriate;
- (C) Tests and methods used to generate monitoring data.
- (ii) Monitoring of:
- (A) The nature of the injected fluids with sufficient frequency, and at least monthly, to yield representative data on the characteristics of the fluid. Whenever the injection fluid is modified to the extent that the previous analysis is incorrect or incomplete, a new analysis shall be provided to the Administrator;
- (B) The injection pressure and either flow rate or volume at least weekly or metering and daily recording of injected and produced fluid volumes as appropriate; and
- (C) Class III injection wells may be monitored for the parameters required by subsections (A) and (B) on a field or project basis rather than an individual well basis by manifold monitoring. Manifold monitoring may be used in cases of facilities consisting of more than one injection well operating with a common manifold. Separate monitoring systems for each well are not required provided the operator demonstrates that manifold monitoring of injection pressure is comparable to individual well monitoring.
- (iii) Requirements for:
- (A) Semi-monthly monitoring of the fluid level in the production zone, where appropriate;
- (B) Semi-monthly monitoring of the water levels and parameters chosen to measure the water quality in monitoring wells;
- (C) Quarterly monitoring of the water levels and parameters chosen to detect any movement of injected fluids, process by-products, or formation fluids in the monitoring wells where the injection wells penetrate an Underground Source of Water in an area subject to subsidence or catastrophic collapse (Section 8(h)(iii) of this Chapter); and
- (D) Periodic monitoring of pressure changes or other physical parameters if such monitoring provides for more rapid detection of excursions.
- (iv) A description of procedures and schedules used to:
- (A) Detect and confirm excursions; and
- (B) Monitor excursions and excursion control efforts.
- (v) Samples and measurements taken for the purpose of monitoring shall be representative of the permitted activity.
020-11 Wyo. Code R. § 11-16
Amended, Eff. 11/13/2018.