Section A-E 7.06 - Relative positional accuracy measurements(1) Measurements shall be made with instruments and methods capable of attaining the relative positional accuracy in accordance with this section.(1m) Relative positional accuracy shall be the value expressed in feet that represents the uncertainty between points of the boundary of the parcel being surveyed due to random errors in measurements at a 95 percent confidence level.(3) The maximum allowable deviation in relative positional accuracy between any 2 adjacent property corners may not exceed plus or minus 0.13 foot plus 100 parts per million.(4) Any closed traverse depicted on a property survey map shall have a latitude and departure closure ratio of less than 1 in 3,000.(5) Bearings or angles on any property survey map shall be shown to at least the nearest 30 seconds. Distances shall be shown to the nearest 1/100th foot.Wis. Admin. Code Examining Board of Architects, Landscape Architects, Professional Engineers, Designers, Professional Land Surveyors, and Registered Interior Designers A-E 7.06
Cr. Register, February, 1987, No. 374, eff. 3-1-87; am. (5), Register, May, 1989, No. 401, eff. 6-1-89.Amended by, CR 15-039: am. (1) to (3), (5) Register May 2016 No. 725, eff.6/1/2016Amended by, CR 19-153: am. (title), (1), cr. (1m), r. (2), am. (3) Register May 2021 No. 785, eff. 6-1-21; correction in (3) made under s. 35.17, Stats., Register May 2021 No. 785, eff. 6/1/2021